P7 WINTER

Product code P935060 00004
Hydraulic motors for swing gates

Reversible hydraulic operator for swing gates up to 7 m. 500 kg in weight. Cycle time 42+slowdown s. Useful travel 390 mm. max angle 123 °.

Hydraulic motors for swing gates

Main features

The rear articulated brackets and jointed rod make installation simple and reliable in all situations.

The brass release knob, protected with a personal key, facilitates the manual opening of the gate in the event of a power cut.

The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Technologies

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Data sheet

technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 250 W
Max. width of door/gate wing 7 m
Max. weight of door/gate wing 500 kg
Useful rod stroke 390 mm
Maximum angle 123 °
Cycle time 42+slowdown s
Type of limit switch work time
Slowdown During closing
Locking Solenoid Lock
Release Reversible
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IP55
Environmental conditions -30 ÷ 60 °C
Interconnectivity no

Control panels

  • Compatible

Universal control panel with potentiometers for one 230V/500W single-phase operator

  • Compatible

Universal control panel with display for one or two 230V - 650+650W operators

Commercial documents

Swinging gates
Hydraulic automation systems for swinging gates
Show

Video

Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

Recommended accessories

ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

CLS
D610180

Triangular release key l=52 mm

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

EBP AC A 230V 50/60HZ
P123032 00001

230V vertical electric lock.

EBP AC A 120V 50/60Hz
P123032 00002

120V vertical electric lock.

MITTO B RCB02 R1
D111904

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

Do you need more information?

Get in touch with us, you will receive our support as soon as possible.

An unexpected error occurred: please reload the page or try again later.