KUSTOS BT KIT A25 FRA
Product code R935307 00005Complete kit 24 V for swing gates up to 400 kg in weight and 2.5 m in length.
PLUS
Covered worm screw: all KUSTOS BT A range operators are telescopic operators with completely covered worm screw. This ensures maximum protection against external agents (water, dust, dirt, etc.) as well as a total protection for people, preventing any type of access to the moving parts.
Magnetic pin: an exclusive feature of Bft operators enabling quicker installation steps, making them easier and always ensuring correct rear locking of the operator
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
Control unit | THALIA |
Board power supply | 230 V |
Motor voltage | 24 V |
Power input | 40 W |
Max. width of door/gate wing | 2.5 m |
Max. weight of door/gate wing | 400 kg |
Useful rod stroke | 295 mm |
Maximum angle | 118 ° |
Cycle time | 13 s |
Type of limit switch | Magnetic |
Slowdown | Yes |
Locking | Mechanical |
Release | Personal key |
Impact reaction | D-Track |
Frequency of use | intensive |
Protection rating | IP44 |
Environmental conditions | -20 ÷ 55 °C |
U-Link | no |

KUSTOS BT A25
Irreversible electromechanical operator 24 V for swing gates weighing up to 400 kg and 2.5 m long.
Open
THALIA
Control panel with display for one or two 24V electromechanical operators for swing gates.


MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

DESME A15
Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.
