ATHOS AC KIT A25 EU

Product code R935339 00002

Complete kit 230 V for swing gates up to 700 kg in weight and 2.5 m in length.

PLUS

Declaration of conformity Download Information

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner

Control unit	ALENA SW2
Board power supply	230 V
Motor voltage	230 V
Power input	280 W
Max. width of door/gate wing	2.5 m
Max. weight of door/gate wing	700 kg
Useful rod stroke	300 mm
Maximum angle	110 °
Cycle time	14 s

Type of limit switch	work time
Slowdown	Yes
Locking	Mechanical
Release	Triangle key
Impact reaction	Electronic clutch
Frequency of use	Semi intensive
Protection rating	IP54
Environmental conditions	-20 ÷ 55 °C
U-Link	no

ATHOS AC A25 AR

Irreversible electromechanical operator 230 V for swing gates weighing up to 700 kg and 2.5 m long.

Open

ALENA SW2 Cod. D113811 00004Application: control panel for one or two operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 230V...
Application: control panel for one or two operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 230V single-phase 400W max each operator.
Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening.
Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics.
Compatibility: ALTAIR and ARIES.

ALENA SW2 120V Cod. D113811 00003Control panel with dip switches and potentiometers for one or two 230V 400W+400W, operators for swing gates and industrial folding doors.
Ap...
Control panel with dip switches and potentiometers for one or two 230V 400W+400W, operators for swing gates and industrial folding doors.
Application: control panel for one or two operators for swing gates.
Board power supply: 120V single-phase.
Operators power supply: 230V single-phase 400W max each operator.
Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening.
Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics.
Compatibility: ALTAIR and ARIES.

PLE ATHOS Cod. N999724Anchor plate for welding the mountings to masonry pillars for ATHOS operators.Anchor plate for welding the mountings to masonry pillars for ATHOS operators.

CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.

BIR C Cod. N190104Rubber safety edge (H 30 mm), price per m.Rubber safety edge (H 30 mm), price per m.

VENTIMIGLIA NS Cod. P111401 00001Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).

ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.

ECB VERTICALE Cod. D121018Vertical solenoid lock, 12/24 V.Vertical solenoid lock, 12/24 V.

RADIUS B LTA 230 R1 Cod. D113748 00002Flashing light with incorporated antenna for motors with power supply 230 V.Flashing light with incorporated antenna for motors with power supply 230 V.

RADIUS B LTA 230 R2 Cod. D113749 00002Flashing light without incorporated antenna for motors with power supply 230 V.Flashing light without incorporated antenna for motors with power supply 230 V.

B 00 R01 Cod. P123026Metal guard for B LTA.Metal guard for B LTA.

B 00 R02 Cod. P123025Wall mounting for B LTA series flashing beacons.Wall mounting for B LTA series flashing beacons.

MITTO B RCB02 R1 Cod. D111904Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

Q.BO KEY WM Cod. P121022Key selector for outdoor use with double contact.Key selector for outdoor use with double contact.

Q.BO KEY WM AV Cod. P121023Vandalproof key selector with double contact, for outdoor use. Metal structure.Vandalproof key selector with double contact, for outdoor use. Metal structure.

Q.BO TOUCH Cod. P121024Wireless digital touchpad with 433 MHz rolling code operation. Manages up to 10 channels and 100 codes.Wireless digital touchpad with 433 MHz rolling code operation. Manages up to 10 channels and 100 codes.

DESME A15 Cod. P111526Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

PHP Cod. P903018Pair of aluminium posts for THEA/DESME series photocells Height 522 mm.Pair of aluminium posts for THEA/DESME series photocells Height 522 mm.

EBP Cod. P123001 00001230 V electric drop lock.230 V electric drop lock.

EBP 24 Cod. P123001 0001324 V solenoid lock, with 230/24 V transformer installable in control panel.24 V solenoid lock, with 230/24 V transformer installable in control panel.