STOPPY MBB KIT 219/700.C 230 C
Product code R950009 00002Electromechanical bollard with foundation box, with shaft height 700 mm and diameter 219 mm. Impact resistance 10500 J. Painted stainless steel version, RAL 7015.
Main features
The option of supply as an integrated unit or with outer casing separate from the operator allows the installer to complete digging and preparation for installation ahead of time.
The new square flange allows for perfect architectonic integration and hence better insertion into the full range of urban contexts.
The conical stem cap and EPDM flange gasket provide highly effective protection against foreign matter entering between the stem and the outer casing, thus making the unit maintenance free.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
| Control unit | PERSEO CBE 230.P SD |
| Power consumption | 300 W |
| Opening or closing time | 9 s |
| Rod height | 700 mm |
| Type of limit switch | REED magnetic sensor |
| Slowdown | Yes |
| Impact resistance | 10500 J |
| Break-in proof | 150000 J |
| Manual cycle | reversible in the absence of voltage |
| Frequency of use | very intensive |
| Protection rating | IP67 |
| Environmental conditions | -40 ÷ 60 °C |
| Interconnectivity | no |
| Power supply system | 230 V |
| Power supply system | 230 V |
| Rod diameter | 219 mm |
| Rod diameter | 219 mm |
The data shown are for information purposes only.
| Control unit | PERSEO CBE 230.P SD |
| Power consumption | 300 W |
| Opening or closing time | 9 s |
| Rod height | 27 inch |
| Type of limit switch | REED magnetic sensor |
| Slowdown | Yes |
| Impact resistance | 10500 J |
| Break-in proof | 150000 J |
| Manual cycle | reversible in the absence of voltage |
| Frequency of use | very intensive |
| Protection rating | IP67 |
| Environmental conditions | -40 ÷ 140 °F |
| Interconnectivity | no |
| Power supply system | 230 V |
| Power supply system | 230 V |
| Rod diameter | 8 inch |
| Rod diameter | 8 inch |
TOTEM UNIT
Cod. P800116
Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included.
TOTEM UNIT - RAL
Cod. P800116 00102
Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL colour as requested.
Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL...
TLIGHTS
Cod. P800117
Traffic lights and top covering for totem
STOPPY ALARM
Cod. P800075
Anti-theft kit: to be ordered separately, assembled during production
TPF
Cod. P800040
Foundation and anchor plate for totem
ACOUSTIC DETECTOR
Cod. D113705
Adjustable acoustic detector for sirens
RME 2
Cod. P111001 00003
230 V dual channel metal object detector with installation base
SPIRA 2X1
Cod. D110926 00001
Magnetic loop 2 x 1 m
