PEGASO BCJA620L01

Product code P925205 00003 International code 2611574

Automatic electromechanical operator for industrial sectional doors with max surface area 20 m² and use Semi intensive. Power supply 230 V. max speed 33 Rpm. max torque 50 Nm. Chain release. IP54

Main features

Management system for stop and intermediate limit switches based on absolute encoder technology with settable zero position.

Control unit with deadman feature on-board operator

Ready-to-use cables with quick-fit connectors.

Technical data sheets

technical design
Interconnectivity no
Door surface area 20 m²
Shaft diameter 1 inch
Type of limit switch Absolute encoder
Travel 18
Locking Mechanical
Control unit LEO B CBB L01
Release Chain release
Nominal voltage 230 V
Frequency of use Semi intensive
Power consumption 750 W
Protection rating IP54
Max surface area 20 m²
Environmental conditions 14 ÷ 122 °F

Control panels

  • Recommended

U-Link control board for Pegaso B Cja single-phase operators

Recommend accessories

CLONIX 2
D111662

Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.

CLONIX 2 2048
D111664

Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

PEGASO CABLE MONO
D121631

Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI
D121632

Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO CABLE ENC 5
D121674

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m

PEGASO CABLE ENC 10
D121675

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m

PEGASO CABLE AUTO 5N
D121679

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10N
D121680

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

PEG CCP
N999468

Extension for PEGASO C operators release chain. Length 4 m

PIG 12/ULISSE S
N733338

Z12 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 14/ULISSE S
N733336

Z14 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 18/ULISSE S
N733339

Z18 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 30/ULISSE S
N733337

Z30 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

COR 30
N733148

Z30 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

COR 40
N733149

Z40 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

SFZ
N733121

Additional fixing bracket kit. To be used on chain drive installations.

PEGASO ADA
N733449

PEGASO ADA adapter for installation on doors with 1"1/4 shaft

FALCON
P111407

Industrial presence sensor installable up to 7 m.

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

An unexpected error occurred: please reload the page or try again later.