P4,5

Product code P935061 00001

Reversible hydraulic operator for swing gates up to 4.5 m. 500 kg in weight. Cycle time 28+slowdown s. Useful travel 390 mm. max angle 123 °.

Main features
  • The rear articulated brackets and jointed rod make installation simple and reliable in all situations.

  • The brass release knob, protected with a personal key, facilitates the manual opening of the gate in the event of a power cut.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Board power supply 230 V
Slowdown During closing
Motor voltage 230 V
Locking Solenoid Lock
Power consumption 250 W
Release Reversible
Max. width of door/gate wing 4.5 m
Impact reaction Hydraulic clutch
Max. weight of door/gate wing 500 kg
Frequency of use very intensive
Useful rod stroke 390 mm
Protection rating IP55
Maximum angle 123 °
Environmental conditions -10 ÷ 60 °C
Cycle time 28+slowdown s
Interconnectivity no
Control unit RIGEL 6
Type of limit switch work time
Imperial measurements

The data shown are for information purposes only.

Board power supply 230 V
Slowdown During closing
Motor voltage 230 V
Locking Solenoid Lock
Power consumption 250 W
Release Reversible
Max. width of door/gate wing 14 ft
Impact reaction Hydraulic clutch
Max. weight of door/gate wing 1102 lbs
Frequency of use very intensive
Useful rod stroke 15 inch
Protection rating IP55
Maximum angle 123 °
Environmental conditions 14 ÷ 140 °F
Cycle time 28+slowdown s
Interconnectivity no
Control unit RIGEL 6
Type of limit switch work time
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

CLS
D610180

Triangular release key l=52 mm

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Swinging gates
Hydraulic automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.