LUX R2B

Product code P935046 00001

Hydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock

Main features

All-aluminium structure with high-resistance anodising treatment.
The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.
The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Declaration of conformity Download Information

technical design

Max. weight of door/gate wing	300 kg
Frequency of use	very intensive
Useful rod stroke	270 mm
Protection rating	IP57
Maximum angle	123 °
Environmental conditions	-10 ÷ 60 °C
Cycle time	17 s
Interconnectivity	no
Type of limit switch	work time

Control unit	RIGEL 6
Slowdown	no
Motor voltage	230 V
Locking	Solenoid Lock
Power consumption	250 W
Release	Reversible
Max. width of door/gate wing	2 m
Impact reaction	Hydraulic clutch

Imperial measurements

The data shown are for information purposes only.

Max. weight of door/gate wing	661 lbs
Frequency of use	very intensive
Useful rod stroke	10 inch
Protection rating	IP57
Maximum angle	123 °
Environmental conditions	14 ÷ 140 °F
Cycle time	17 s
Interconnectivity	no
Type of limit switch	work time

Control unit	RIGEL 6
Slowdown	no
Motor voltage	230 V
Locking	Solenoid Lock
Power consumption	250 W
Release	Reversible
Max. width of door/gate wing	6 ft
Impact reaction	Hydraulic clutch

ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

ARB LUX
N733426

Adjustable front and rear bracket for LUX operator

ARB LUX G
N733474

Adjustable front and rear bracket for LUX G operator

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

CLS
D610180

Triangular release key l=52 mm

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

View all the accessories

Swinging gates

Hydraulic automation systems for swinging gates

An unexpected error occurred: please reload the page or try again later.