LUX R 2B SN2

Product code P935046 00002

Hydraulic operator 230 V for hinged leaves up to 2 m and 300 kg in weight. Useful travel 250 mm, manoeuvre time 16+rall. s and maximum opening angle 101 °. Locking system: Open/close hydraulics

Main features
  • All-aluminium structure with high-resistance anodising treatment.

  • The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.

  • The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

technical design
Max. weight of door/gate wing 300 kg
Frequency of use very intensive
Useful rod stroke 250 mm
Protection rating IP57
Maximum angle 101 °
Environmental conditions -10 ÷ 60 °C
Cycle time 16+rall. s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown Yes
Motor voltage 230 V
Locking Open/close hydraulics
Power consumption 250 W
Release Triangle key
Max. width of door/gate wing 2 m
Impact reaction Hydraulic clutch
Imperial measurements

The data shown are for information purposes only.

Max. weight of door/gate wing 661 lbs
Frequency of use very intensive
Useful rod stroke 9 inch
Protection rating IP57
Maximum angle 101 °
Environmental conditions 14 ÷ 140 °F
Cycle time 0 s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown Yes
Motor voltage 230 V
Locking Open/close hydraulics
Power consumption 250 W
Release Triangle key
Max. width of door/gate wing 6 ft
Impact reaction Hydraulic clutch
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

ARB LUX
N733426

Adjustable front and rear bracket for LUX operator

ARB LUX G
N733474

Adjustable front and rear bracket for LUX G operator

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

CLS
D610180

Triangular release key l=52 mm

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Swinging gates
Hydraulic automation systems for swinging gates
Show

An unexpected error occurred: please reload the page or try again later.