KUSTOS ULTRA BT KIT A40 FRA

Product code R935311 00005

Complete kit 24 V for swing gates up to 500 kg in weight and up to 4 m in length. Operators with covered worm screw (IP44). Integrated mechanical stops.

Main features
  • Covered worm screw: all KUSTOS BT A range operators are telescopic operators with completely covered worm screw. This ensures maximum protection against external agents (water, dust, dirt, etc.) as well as a total protection for people, preventing any type of access to the moving parts.

  • Magnetic limit switch and integrated stops: the magnetic limit switch system ensures maximum precision of movement and quick and easy adjustment. Coupled with integrated adjustable mechanical stops, they allow precise installation without requiring floor stops.

  • Magnetic pin: an exclusive feature of Bft operators enabling quicker installation steps, making them easier and always ensuring correct rear locking of the operator

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit THALIA
Board power supply 230 V
Motor voltage 24 V
Power consumption 40 W
Max. width of door/gate wing 4 m
Max. weight of door/gate wing 500 kg
Useful rod stroke 355 mm
Maximum angle 126 °
Cycle time 17 s
Type of limit switch Magnetic
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction D-Track
Frequency of use intensive
Protection rating IP44
Environmental conditions -20 ÷ 55 °C
Interconnectivity no
Warning lights for gates, 24volt or 230 volt
RADIUS B LTA 24 R1

Flashing light with incorporated antenna for motors with power supply 24 V.

Automatic gates photocells
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Motors and kit for swing gates, with covered worm screw and U-link technology
KUSTOS ULTRA BT A40

Irreversible electro-mechanical operator 24 V for swing gates up to 500 kg in weight and up to 4 m in length with covered worm screw. Integrated mechanical stops.

THALIA

Control panel with display for one or two 24V electromechanical operators for swing gates

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

ARB KUSTOS FRONT
N733646

Front adjustable fixing brackets for Kustos BT A

PLE
D730178

Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

CABLE N BT
N999404

Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

RADIUS LED BT A R1 W
D114168 00003

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

RADIUS LED BT A R0
D114094 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

Swinging gates
Electromechanical automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.