BERMA SEB R

Product code P915105 00001 International code 2611520
Motors for the automation of up-and-over garage doors for intensive use

Hydraulic operator for overhead garage doors of maximum surface area 9 m² and very intensive use.

Motors for the automation of up-and-over garage doors for intensive use

Main features

Release system that can also be activated from outside by a steel cable in the SEB version.

The by-pass valves allow the exact setting of the torque separately and independently for opening and closing.

The hydraulic slowdown guarantees silent, smooth movements on even the biggest doors. Also, the adjustment screw makes it possible to adapt the slowdown intensity to each situation.

Technologies

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Technical data sheets

technical design
Power consumption 250 W
Interconnectivity no
Slowdown Hydraulic
Door surface area 9 m²
Locking Hydraulic
Release lever for steel cable
Impact reaction Hydraulic clutch
Frequency of use very intensive
Control unit RIGEL 6
Protection rating IPX5
Nominal voltage 230 V
Environmental conditions -15 ÷ 60 °C

Recommend accessories

ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

CA1
N733038

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

CA2
N733040

Straight arm accessories for installation of two BERMA series operators on overhead door

CA2C
N733041

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

CAS1
N733042

Straight arm accessories for installation of one Berma operator L = 1000 mm Spain version

CAS1L
N733074

Straight arm accessories for installation of one Berma operator L = 1500 mm Spain version

CAS2
N733048

Straight arm accessories for installation of two Berma operators L = 1000 mm Spain version

CAS2L
N733075

Straight arm accessories for installation of two Berma operators L = 1500 mm Spain version

SEB
N733020

External key release for BERMA, FORB, IGEA LB and IGEA LB BT

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

MITTO STYLE C4
D112307

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Black with chrome keyring loop.

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

An unexpected error occurred: please reload the page or try again later.