WIND RM

Electric motors for rolling shutters


Electric motors for rolling shutters

230V operators for roller shutters with maximum torque up to 445 Nm. Suitable for mounting on shutters with pulley diameter of 200, 220, 240 and 280mm shaft diameter 42, 48, 60, 76 and 101mm. Available in versions with or without electric brake.

Main features

Simple and intuitive adjustment of limit switches

Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack

Technologies
Products list
Electric motors for rolling shutters
WIND RMB 130B 200-230

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption 400 W. Reversible.

Electric motors for rolling shutters
WIND RMB 130B 200-230 EF

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption 400 W. Release with steel cable and knob for electric brake.

Electric motors for rolling shutters
WIND RMB 170B 200-230

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 170 Nm and power consumption 600 W. Reversible.

Electric motors for rolling shutters
WIND RMB 170B 200-230 EF

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 170 Nm and power consumption 600 W. Release with steel cable and knob for electric brake.

Electric motors for rolling shutters
WIND RMB 350B 200-230 EF

Operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 357 Nm and power consumption 1200 W. Release with steel cable and knob for electric brake.

Electric motors for rolling shutters
WIND RMC 235B 240-230

Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 235 Nm and power consumption 600 W. Reversible.

Electric motors for rolling shutters
WIND RMC 235B 240-230 EF

Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 235 Nm and power consumption 600 W. Release with steel cable and knob for electric brake.

Electric motors for rolling shutters
WIND RMC 445B 240-230 EF

Operator for roller shutters with spring shaft pulley diameter 240 mm. Maximum torque 445 Nm and power consumption 1200 W. Release with steel cable and knob for electric brake.

Electric motors for rolling shutters
WIND RMB KIT 130B 200-230 EF AUTO

Kit containing operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption 400 W. Release with steel cable and knob for electric brake. Control...

Electric motors for rolling shutters
WIND RMB KIT 130B 200-230 EF UP

Kit containing operator for roller shutters with spring shaft pulley diameter 200 mm. Maximum torque 130 Nm and power consumption 400 W. Release with steel cable and knob for electric brake....

Accessories

Recommended accessories.

SHEDIR B CBC 02 L01
P111515

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

BOX
N574039

Wall cabinet for release with steel cable and electric control; cable not included

X EF1
N999510

Electric brake for Wind Rmc and Rmb 230V

An unexpected error occurred: please reload the page or try again later.