Solution
CENTRALIZED CONTROL

Bft products

CENTRALIZED CONTROL
STOPPY MBB

Complete range of automatic electromechanical retractable bollards for the protection and safety of all areas that require controlled access. <br>Rod height 500 and 700mm. Ideal for contexts of particular architectural interest, guaranteeing maximum reliability over time and requiring minimal maintenance.

CENTRALIZED CONTROL
PERSEO

Universal control panel for one or two 230V operators.

CENTRALIZED CONTROL
MICHELANGELO BT A

Range of barriers for very intensive use, for clear openings of up to 8 metres. <br>The wide range of accessories, incorporated flashing light and the arrangement for photocells make them ideal in any context.

CENTRALIZED CONTROL
ESPAS 20

System for collective and commercial parking solutions, able to operate exclusively in "stand-alone" mode. Operation between the different devices of the parking system and calculation of tariff are managed through the issue of a ticket fan folder with type 2D barcode and reading via optical module with integrated motion detection function. The posts can be combined with other stations to automate up to a maximum of 8 entrances and exits. <br>Front opening for ease of inspection during installation and subsequent operation by the user. <br>The steel sheet body is cataphoresis treated and polyester coated.

CENTRALIZED CONTROL
XPASS B

Independent side hydraulic pump for each bollard: in case of a control unit failure the other bollards remain functional, whereas maintenance operations are facilitated. <br>Anti-terrorist bollards tested and certified (crash-tested) by an independent body according to standards IWA14-1:2013 and PAS 68 (equivalent to US standards K12 and K4), with independent hydraulic control unit. Suitable for protection of sensitive sites.

CENTRALIZED CONTROL
STOPPY B

Complete range of automatic electromechanical retractable bollards for the protection and safety of all areas that require controlled access. <br>Shaft height 500 and 700mm. Ideal for collective use.

CENTRALIZED CONTROL
PILLAR B

Anti-terrorist hydraulic bollard with incorporated hydraulic control unit. Suitable for protecting sensitive sites, thanks to the special “SD” version, which keeps the shaft raised in case of a power failure and with public installations where, in the standard version, the shaft lowers automatically with no power.

CENTRALIZED CONTROL
MOOVI

Range of barriers for very intensive use, for clear openings up to 6 m. <br>The wide range of accessories available makes them ideal in any context.

CENTRALIZED CONTROL
GIOTTO BT A

Range of barriers for intensive and very intensive use, able to manage useful passages up to 6 m. Integrated control unit with U-Link connectivity. <br>Available in 24V versions, they have a wide range of accessories making them ideal in any context.

CENTRALIZED CONTROL
ESPAS 30

Parking system for commercial and professional applications, able to operate in wired mode through an RS485 serial network. The interfaces of the entry/exit stations have an LCD display for indicating the operations to be performed, by voice synthesis for audio instructions and an optical module integrated with motion detection function for reading and management of ticket fan folders with type 2D barcode. <br>Front opening for ease of inspection during installation and subsequent operation by the user. <br>The steel sheet body is cataphoresis treated and polyester coated.

CENTRALIZED CONTROL
U-BASE

Designed according to the installer's specific needs for easy management and maintenance of the systems, the innovative U-Base software features an immediate and intuitive user interface and can operate on-line, updating data directly on connected systems or off-line operating on the information present in the local database of the computer on which it is installed. <br>For operation, the system requires the installation of a B EBA gateway expansion card connected to the control unit and allows interfacing even wirelessly or remotely with Bft control units (U-Link compatible). <br>The main functions include the possibility of displaying and editing control unit parameters and logics, as well as viewing the list of recorded alarms. Through an immediate graphic interface, also all the functions and parameters of the motors are monitored, displaying the threshold current, absorbed current and the position of the operator in real-time.

CENTRALIZED CONTROL
CLONIX

Ricevente radio esterna in quadro, 433 MHz, rolling code. In base al modello può comandare 1 o 2 uscite tramite relè.Le versioni Ultra dispongono di un o più slot per accogliere le schede di espansione B EBA per la comunicazione multi protocollo.

CENTRALIZED CONTROL
DEIMOS ULTRA BT A

Range of operators for sliding gates weighing up to 600 Kg. <br>Maximum leaf speed up to 16 m/min. <br>Newly designed magnetic limit switch for quicker installation; precise and perfectly integrated with architecture of site. <br>Residential use. <br>Control unit designed for use with the Blue Entry system.

CENTRALIZED CONTROL
ARES ULTRA BT A

24 V sliding gates operator for intensive use,up to 1500 Kg in weight. Leaf speed up to 9 m/min. Magnetic limit switch and control board with U-link protocol embedded.

CENTRALIZED CONTROL
ICARO SMART AC A

230V sliding gate operators for very intensive use, extremely sturdy and high-performance thanks to oil bath transmission. Control of torque via D-track technology and absolute encoder for maximum precision of movement. Control unit arranged for communication with U-link protocol and with tamper-proof function. <br>The control unit ensures complete safety thanks to the exclusive torque control system that makes these operators comply fully with the current European standards.

CENTRALIZED CONTROL
ICARO ULTRA AC A

230V sliding gate operators for very intensive use, extremely sturdy and high-performance thanks to oil bath transmission. Control of torque via D-track technology and absolute encoder for maximum precision of movement. Control unit arranged for communication with U-link protocol and with tamper-proof function. <br>The control unit ensures complete safety thanks to the exclusive torque control system that makes these operators comply fully with the current European standards.

CENTRALIZED CONTROL
SP3500

The heavy structure of the gear motor, the painted galvanised steel casing and the on-board control unit make it the ideal solution for all industrial situations where reliability and power are essential. <br>Powerful, robust operators with 400V three-phase power supply designed specifically for large, heavy gates.

Set of batteries for control units

STOPPY BAT Cod. P975001 Backup battery kit to allow bollards to stay up in case of no power.

Metal mass detectors

RME 2 Cod. P111001 00003 230 V dual channel metal object detector with installation base.

SPIRA 2X1 Cod. D110926 00001 Magnetic loop 2 x 1 m.

Expansion boards

B EBA TCP/IP GATEWAY Cod. D113805 00002 Gateway expansion card to connect automation systems in TCP/IP networks via U-Link slot. It manages up to 120 U-Link devices connected via B EBA RS-485 Link.

B EBA RS 485 LINK Cod. P111468 Expansion board for connection of central units with serial controls management.