HIDE SW

Product code P930124 00001

Disappearing irreversible electromechanical operator 24 V for swing gates weighing up to 150 kg and 2 m long.

PLUS
  • Its cylindrical shape of maximum outside diameter 80mm allows it to be installed rapidly in the jamb of the leaf. The pre-wiring enables fast, user-friendly electrical connection to the control unit.

  • Hide SW is able to withstand the most severe weather conditions and wind, allowing operation even of solid gates equal to 3m² at up to 120 km/h (class 2, EN13241).

  • The LIBRA CB HIDE control unit is able to optimize the operator functions, allowing separate management of the motors in the times for working, torque control and slowing down, calibrating to the actual needs thanks to the built-in "D-Track" function.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Recommended - Recommended control panel
LIBRA CB HIDE
technical design HIDE SW
Control unit LIBRA CB HIDE
Board power supply 230 V
Motor voltage 24 V
Power input 40 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 150 kg
Maximum angle 110 °
Cycle time 12 s
Type of limit switch Absolute encoder
Slowdown Yes
Locking Electromechanical
Release Steel cable
Impact reaction D-Track
Frequency of use intensive
Protection rating IP45
Environmental conditions -20 ÷ 60 °C
U-Link no

HIDE HINGE SUP Cod. N999526Top hinge for the installation of HIDE SW series operator.Top hinge for the installation of HIDE SW series operator.

HIDE HINGE INF Cod. N999524Bottom fixed hinge for the installation of HIDE SW series operator.Bottom fixed hinge for the installation of HIDE SW series operator.

BOX Cod. N574039Wall safe for unlocking with steel cable and electrical control; cable not included.Wall safe for unlocking with steel cable and electrical control; cable not included.

BT BAT Cod. P125005Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO.Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.