Motorised column for automatic chain barrier 24 V for intensive use, suitable for delimiting access zones of residential and industrial areas and small car parks, covering access points up to 16 m.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
|Control unit||LOG-BC with receiver|
|Motor power supply||24 V|
|Opening or closing time||10 s|
|Safety||Armoured padlock with numbered key|
|Chain||Ø 8 (PRV-CHN 10). / Ø 4.5(PRV-CHN 16) mm|
|Useful passage||16 m|
|Type of limit switch||Electronic|
|Impact reaction||Electronic torque limiter|
|Frequency of use||intensive|
|Environmental conditions||-20 ÷ 60 °C|
PRV-CHN 10 Cod. P800077Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.
PRV-CHN 16 Cod. P800078Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.
TWIN CHN PADLOCK Cod. P800107Armoured lock for Twin chain closing.Armoured lock for Twin chain closing.
CHN-DRIVE 1 Cod. P800088Above-ground guide for holding chain (2 m).Above-ground guide for holding chain (2 m).
CHN-DRIVE 2 Cod. P800079Pavement guide (2 metres) for housing chain.Pavement guide (2 metres) for housing chain.
BBV TWIN Cod. P120068TWIN backup batteries.TWIN backup batteries.
SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.