SP3500 SF TRI 400
Product code P925244 00003Operator 400 V for sliding gates weighing up to 3500 kg. Leaf speed 10 m/min. U-link and limit switch Electromechanical. Three-phase power supply 400 V. Fixing base included.
Main features
Travel limits can be adjusted simply with the lever arm electromechanical limit switch system, giving absolute precision in stopping.
The powerful electric brake allows to block the leaf after the closing operations, guaranteeing a perfect closure even in sloped installations.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerThe new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Control unit | SIRIO CBB |
Board power supply | 400 V |
Supply voltage | 400 V |
Power consumption | 550 W |
Max. door/gate weight | 3500 kg |
Gate panel speed | 10 m/min |
Type of limit switch | Electromechanical |
Pinion module | 6 |
Slowdown | no |
Locking | Mechanical |
Release | Hex key |
Impact reaction | Sensitive edge |
Frequency of use | very intensive |
Protection rating | IP54 |
Environmental conditions | -15 ÷ 50 °C |
Interconnectivity | no |

B EBA RS 485 LINK
Cod. P111468
Expansion board for connection of central units with serial controls management

RADIUS LED AC A R1
Cod. D114093 00002
Flashing light with incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
Cod. D114094 00002
Flashing light without incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
Cod. P111782
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

CFZ6
Cod. D571491
galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding attachment Max. load capacity 4000 kg.

SFSP
Cod. P125015
Adjustable anchor base for SP3500, supplied separately

SP3500 SAFETY
Cod. P125016
Safety microswitch for SP3500

CLONIX 2
Cod. D111662
Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.

CLONIX 2 2048
Cod. D111664
Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.
