SHYRA CPEM 120V
Product code D113802 00001Control panel with dip switches and potentiometers for one 230 V 50/60 Hz, 500 W operator. Board power supply: 120V single-phase Operator power supply: 230 V single-phase, max. 500 W Principal features: potentiometer control, LED fault detection and built-in dual channel receiver, two verified safety inputs including one dedicated for 8k2 obstruction sensor, pedestrian opening with remote control only.
| Interconnectivity | no |
| Maximum output | 500 W |
| Board power supply | 120 V |
| Max. n. transmitters | 63 |
| Programming | DIP+TRIMMER |
| Power supply accessories | 24V - 0,2A |
| Light sensor | 1 |
| Safety edge | 1 |
| Resistive edge | 1 |
| Tested photocell | 1 |
| Tested safety edge | 1 |
| Stop | 1 |
| Start | 1 |
| Open | 1 |
| Blinker | 0 |
| Configurable AUX 1 | 0 |
| Configurable AUX 1 | 0 |
| Configurable AUX 2 | 0 |
| Configurable AUX 2 | 0 |
| Configurable AUX 3 | 0 |
| Configurable AUX 3 | 0 |
| Solenoid Lock | 0 |
| Solenoid Lock | 0 |
| Alarm | 0 |
| Alarm | 0 |
| Courtesy Light | 0 |
| Courtesy Light | 0 |
| Gate open warning light | 0 |
| Gate open warning light | 0 |
| Courtesy light | 0 |
| Courtesy light | 0 |
| Stairs light | 0 |
| Stairs light | 0 |
| Gate open alarm | 0 |
| Gate open alarm | 0 |
| Maintenance | 0 |
| Maintenance | 0 |
| Flashing + Maintenance | 0 |
| Flashing + Maintenance | 0 |
| Tamper-proof | 0 |
| Tamper-proof | 0 |
| Gate status | 0 |
| Gate status | 0 |
| Bistable radio channel | 0 |
| Bistable radio channel | 0 |
| Time delay radio channel | 0 |
| Time delay radio channel | 0 |
| Photocell response | 0 |
| Photocell response | 0 |
| Obstacle detection (hydraulic only) | 0 |
| Obstacle detection (hydraulic only) | 0 |
| Encoder response | 0 |
| Encoder response | 0 |
| PDM contact activated | 0 |
| PDM contact activated | 0 |
| Bar closed | 0 |
| Bar closed | 0 |
| Bar open | 0 |
| Bar open | 0 |
| Stop contact activated | 0 |
| Stop contact activated | 0 |
| Pre-flashing | 0 |
| Pre-flashing | 0 |
| Bar lock | 0 |
| Bar lock | 0 |
| Open contact activated | 0 |
| Open contact activated | 0 |
| Zone light | 0 |
| Zone light | 0 |
| Electric magnetic lock | 0 |
| Electric magnetic lock | 0 |
| Close contact activated | 0 |
| Close contact activated | 0 |
| Start contact activated | 0 |
| Start contact activated | 0 |
| Contact according to radio channel | 0 |
| Contact according to radio channel | 0 |
| bollard raised | 0 |
| bollard raised | 0 |
| bollard lowered | 0 |
| bollard lowered | 0 |
| Black out | 0 |
| Black out | 0 |
| Buzzer | 0 |
| Buzzer | 0 |
| ECD pressure switch not functioning | 0 |
| ECD pressure switch not functioning | 0 |
| FCC sensor not functioning | 0 |
| FCC sensor not functioning | 0 |
| Alarm | 0 |
| Alarm | 0 |
| UPS contact | 0 |
| UPS contact | 0 |
| FRAC contact | 0 |
| FRAC contact | 0 |
| Electric release lock | 0 |
| Electric release lock | 0 |
