PERSEO CBE 230.P SD

Product code D113812 00002

Control unit with U-Link, receiver and incorporated heating circuit (to -40°C) for electro-mechanical and hydraulic bollards. Can manage up to 4 bollards at the same time (or up to 1 Xpass 330/1200) Application: Control panel for operating 1 to 4 automatic bollards, single-phase (in parallel) (or max. 1 Xpass 330/1200) Board power supply: 230V single phase Output power: 230Vac single-phase, 12A max. Main features: removable terminal blocks, digital programming, 3-digit display, Proxima programmer connector, dual-channel receiver 2048 codes included, heater for operation to -40°C, complete support for anti-terrorism bollards, 11 inputs, 9 outputs. Main features: U-Link interconnectivity, automatic reclosing, separate open and close, pre-flashing, deadman control, automatic or semi-automatic, opening and closing limit switch management, arranged for UPS.

Technologies
Maximum output 350 W
Maximum output 350 W
Board power supply 220-230 V
Board power supply 220-230 V
Max. n. transmitters 2048
Max. n. transmitters 2048
Programming Display
Programming Display
Power supply accessories 24V - 1A
Power supply accessories 24V - 1A
Light sensor Yes
Light sensor Yes
Stop Yes
Stop Yes
Start Yes
Start Yes
Open Yes
Open Yes
Close Yes
Close Yes
Configurable input Yes
Configurable input Yes
Blinker no
Blinker no
Configurable AUX 1 24V - 0,5A
Configurable AUX 1 24V - 0,5A
Configurable AUX 2 no
Configurable AUX 2 no
Configurable AUX 3 no
Configurable AUX 3 no
Solenoid Lock no
Solenoid Lock no
Alarm no
Alarm no
Courtesy Light no
Courtesy Light no
Gate open warning light no
Gate open warning light no
Courtesy light no
Courtesy light no
Gate open alarm no
Gate open alarm no
Electric magnetic lock no
Electric magnetic lock no
Maintenance Yes
Maintenance Yes
Flashing + Maintenance no
Flashing + Maintenance no
Tamper-proof no
Tamper-proof no
Gate status no
Gate status no
Bistable radio channel no
Bistable radio channel no
Time delay radio channel no
Time delay radio channel no
Photocell response Yes
Photocell response Yes
Obstacle detection (hydraulic only) Yes
Obstacle detection (hydraulic only) Yes
Encoder response no
Encoder response no
PDM contact activated Yes
PDM contact activated Yes
Bar closed no
Bar closed no
Bar open no
Bar open no
Stop contact activated Yes
Stop contact activated Yes
Pre-flashing Yes
Pre-flashing Yes
Bar lock no
Bar lock no
Open contact activated Yes
Open contact activated Yes
Close contact activated Yes
Close contact activated Yes
Start contact activated Yes
Start contact activated Yes
FRAC contact no
FRAC contact no
UPS contact Yes
UPS contact Yes
Contact according to radio channel Yes
Contact according to radio channel Yes
bollard raised Yes
bollard raised Yes
bollard lowered Yes
bollard lowered Yes
Black out Yes
Black out Yes
Buzzer Yes
Buzzer Yes
ECD pressure switch not functioning Yes
ECD pressure switch not functioning Yes
FCC sensor not functioning Yes
FCC sensor not functioning Yes
Alarm no
Alarm no
Zone light no
Zone light no
Stairs light no
Stairs light no
Electric release lock no
Electric release lock no
Interconnectivity Yes
Interconnectivity Yes

An unexpected error occurred: please reload the page or try again later.