ORO E

Product code P935058 00001

Reversible hydraulic operator for hinged leaves up to 2.5 m and weight 200 kg, use Semi intensive. Manoeuvre time 27 s.

Main features
  • All the reliability and power of hydraulics in an extremely small-size, compact unit.

  • In the ORO version, the brass release valve allows the gate to be opened manually in the event of a power cut, and in the ORO E version it simplifies the manual cycle.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 240 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 200 kg
Useful rod stroke 250 mm
Maximum angle 112 °
Cycle time 27 s
Type of limit switch work time
Slowdown no
Locking Solenoid Lock
Release Reversible
Impact reaction Hydraulic clutch
Frequency of use Semi intensive
Protection rating IP55
Environmental conditions -10 ÷ 60 °C
Interconnectivity no
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

CLS
D610180

Triangular release key l=52 mm

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Swinging gates
Hydraulic automation systems for swinging gates
Show

An unexpected error occurred: please reload the page or try again later.