PILLAR B 275/800.10C

Hydraulic retractable bollard with security system for power outages

Hydraulic retractable bollard with security system for power outages

High strength automatic hydraulic bollard with built-in hydraulic control unit, tested and certified by an independent organisation in accordance with PAS68:2010 with 7500/50/N2 rating that includes ASTM F2656:2007 M30 (dynamic simulation). SD version which keeps the bollard raised in the event of a loss of power (protection of sensitive sites). Standard version where the bollard instantly drops in the event of a loss of power.

Hydraulic retractable bollard with security system for power outages

Technologies

Easily accessed hydraulic pump

This solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.

Products list

    230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Painted stainless steel version, RAL 7015. Foundation box included.

      230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Painted steel version. RAL colour to order. Foundation box included

        230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Foundation box included.

          Hydraulic bollard 230 V, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm approved. The shaft stays raised in case of a power failure. RAL 7015 painted steel version.

            230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm, approved. The shaft remains in the raised position in case of a power failure. Painted steel version, RAL colour to order. Foundation box included.

              230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and adhesive H strip: 100 mm, approved. In the event of a power cut, the bollard remains raised. 304 stainless steel version. Foundation box included.

              Accessories

              PILLAR ALARM
              P800102

              Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering

              ACOUSTIC DETECTOR
              D113705

              Adjustable acoustic detector for sirens

              RME 2
              P111001 00003

              230 V dual channel metal object detector with installation base

              SPC3
              D121619

              Open stop close button panel.

              SPIRA 2X1
              D110926 00001

              Magnetic loop 2 x 1 m

              MANUAL PUMP 2LT
              P800111

              2 litre manual pump

              BOLLARD CABLE EXT25
              P800114

              Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

              TAP FOR MANUAL PUMP
              P800112

              Joint for two-litre manual pump.

              BOLLARD CABLE EXT50
              P800115

              Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

              LOOP DETECTOR PRO 230V
              P111786

              Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

              Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

              An unexpected error occurred: please reload the page or try again later.