Simple and intuitive adjustment of limit switches
Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack
WIND RM
Electric motors for rolling shutters
230V operators for roller shutters with maximum torque up to 445 Nm. Suitable for mounting on shutters with pulley diameter of 200, 220, 240 and 280mm shaft diameter 42, 48, 60, 76 and 101mm. Available in versions with or without electric brake.
PLUS
Products list
WIND RMB 130B 200-230
Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 130 nm and absorbed power 400 W. Reversible.
Open
WIND RMB 130B 200-230 EF
Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 130 nm and absorbed power 400 W. Release with steel cable and knob for electric brake.
OpenWIND RMB 170B 200-230
Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 170 nm and absorbed power 600 W. Reversible.
OpenWIND RMB 170B 200-230 EF
Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 170 nm and absorbed power 600 W. Release with steel cable and knob for electric brake.
Open
WIND RMB 350B 200-230 EF
Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 357 nm and absorbed power 1200 W. Release with steel cable and knob for electric brake.
Open
WIND RMC 235B 240-230
Operator for shutters with spring holder pulley diam. 101 mm. Max. torque 235 nm and absorbed power 600 W. Reversible.
OpenWIND RMC 235B 240-230 EF
Operator for shutters with spring holder pulley diam. 101 mm. Max. torque 235 nm and absorbed power 600 W. Release with steel cable and knob for electric brake.
Open
WIND RMC 445B 240-230 EF
Operator for shutters with spring holder pulley diam. 101 mm. Max. torque 445 nm and absorbed power 1200 W. Release with steel cable and knob for electric brake.
OpenAccessories
Recommended accessories.
SHEDIR B CBC 02 L01 Cod. P111515Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
Application: wire centralisation board for 1 or 2 tubular...
Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
Application: wire centralisation board for 1 or 2 tubular motors.
Board power supply: 230V single-phase.
Operator power supply: 230V 600W max. each operator.
Main characteristics: simplified and compact wire centralisation system.
Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down.
ELBA Cod. D113716 00002Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for REEL type operator for roller shutters.
Board...
Control panel, max 230V, for roller shutters or roll-up doors.
Application: control panel for REEL type operator for roller shutters.
Board power supply: 230V single-phase.
Operator power supply: 230V monophase.
Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver.
Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management.
Compatibility: CAPRI, CAPRI RIC, CAPRI TCA.
CMS Cod. D831081Sign.Sign.
