Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels.
For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
MITTO B RCB04 R1 CLEAR ICE
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.
MITTO B RCB04 R1 SUNRISE
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: sunrise yellow
MITTO B RCB04 R1 VINEYARD
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: vineyard red
MITTO B RCB04 R3 4CH 100PZ
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.
MITTO B RCB04 R2 REPLAY
Copyable transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A
MITTO B RCB02 R3 2CH 100PZ
Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.
MITTO B RCB02 R2 REPLAY
Copyable transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
MITTO B RCB02 R1
Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A
CLONIX 4 RTE
Cod. D113718 00002
Ricevente 4 canali da esterno 433 MHz rolling code. Uscite relé di potenza 16 A. Alimentazione 230 V.
Cod. D113674 00001
Ricevente bicanale da esterno 433 MHz rolling code. Memoria a 128 posizioni. Alimentazione 24 V.
Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included
Programmer for radio control units and receivers with possibility of wired or BlueTooth connection
CLIP B 00 R04
Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack
CLIP1 B 00 R03
Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs