Accessories

PCA N8
P120028 00005

Top and bottom rubber cover profile for booms of 8 m max.

ATM30 180° RG
P120063

Articulated bar 180 ° 3 m with lights R/G

ACTR
N999608

Pack of 12 additional reflective labels (1 pack already included with each boom)

PCA N5
P120028 00003

Top and bottom rubber cover profile for booms of 5 m max.

PCA N4
P120028 00002

Top and bottom rubber cover profile for booms of 4 m max.

PCA N6
P120028 00004

Top and bottom rubber cover profile for booms of 6 m max.

OMEGA AT 70
N999607

Accessories pack for AT 704/706

OMEGA AQ 6
N999606

Accessories pack for AQ 6 boom

ZFAF2
P120026

Additional anchor plates for cementing FAF2 forks to ground.

PCA N3
P120028 00001

Top and bottom rubber cover profile for booms of 3 m max.

BIN120 CATENA 3500
P115010 00002

Chain track for EOS 120, length 3500 mm, working stroke 3000 mm

BIN B GDA 3020 CAT
P115015 00001

Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B GDA 3620 CAT
P115015 00002

Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN B Gda 2x1510 Cat
P115015 00003

Chain track divided into two halves for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B Gda 2x1810 Cat
P115015 00004

Chain track divided into two halves for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN B GDA 2x1810 BELT
P115026 00004

Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN B GDA 3620 BELT
P115026 00002

Monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN B GDA 3020 BELT
P115026 00001

Monoblock belt rail, length 3020 mm, useful length 2560 mm

BIN B GDA 2x1510 BELT
P115026 00003

Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm

ECOSOL CABLE
N999476

20 m extension for ECOSOL CHARGER

PEGASO CABLE MONO
D121631

Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI
D121632

Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO CABLE AUTO 5
D121633

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO INT CABLE 10
D121649

Pre-wired connection cable between PEG INT and external control unit for the management of motor safety systems and limit switches. Length 10 m

Pre-wired connection cable between PEG INT and external control unit for the management of motor safety systems and limit switches. Length...

PEGASO UP CONTROL 5
D121624

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

PEGASO UP CONTROL 10
D121625

Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

UNICAVO
D121502

Serial cable for connection of PROXIMA to PC or of COMPASS 232/COMPASS SC 232 to PC

PEGASO CABLE ENC 5
D121674

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m

PEGASO CABLE ENC 10
D121675

Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m

PEGASO CABLE AUTO 5N
D121679

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m

PEGASO CABLE AUTO 10N
D121680

Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m

BOLLARD CABLE EXT15
P800041

Extra charge for 15 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT40
P800042

Extra charge for 40 m cable for bollards (to be added to the 10 included into bollards)

APT
N999060

Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

ECOSOL POST BR
N999473

Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm

ECOSOL SECURITY
N999475

Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR

TPF
P800040

Foundation and anchor plate for totem

SBV
P111445

Опорная поперечина из анодированного алюминия для VISTA SL

SBV
P111445

Опорная поперечина из анодированного алюминия для VISTA SL

PPR
P111156

Door guide slide for automatic doors with aluminium frame

PGI
P111158

Bottom door guide for automatic doors with aluminium frame

PEGASO ADA
N733449

PEGASO ADA adapter for installation on doors with 1"1/4 shaft

PEG CCP
N999468

Extension for PEGASO C operators release chain. Length 4 m

SFZ
N733121

Additional fixing bracket kit. To be used on chain drive installations.

SFD
N999151

Base plate for DEIMOS series (supplied with operator)

SFI
N999156

Base plate for ARES and ICARO (supplied with operator)

SFSP
P125015

Adjustable anchor base for SP3500, supplied separately

BASP
P125001

Основа для анкерного крепления для SP4000 (поставляется вместе с приводом)

BASP
P125001

Основа для анкерного крепления для SP4000 (поставляется вместе с приводом)

SP3500 SAFETY
P125016

Safety microswitch for SP3500

SLV SBV C1
N733527

Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece

SLV SBV C2
N733526

Brackets for side mounting of the SBV C aluminium supporting crosspiece

SAS2 KIT B GDA 260 B01
N999621

Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

SAS1 KIT B GDA 260 B01
N999620

Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm

PPE
D730567

Anchoring plate

SBV TL
P111640 00001

Vista TL support beam, length 6,82 m

LRV
P135005

Short articulated arms for IGEA and IGEA BT

FCS BT
N733480 00001

Foundation box for SUB BT series operators

CID SX
N733201 00002

Left hand tin plate + acc.(SUB)

CID DX
N733201 00001

Right hand tin plate + acc.(SUB)

PBE
N733391

Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

CBA
N733112

Straight telescopic arms for the installation of PHEBE series operators on overhead door

CBAC
N733114

Curved telescopic arms for the installation of PHEBE series operators on overhead door

CBAS
N733119

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm

CBASL
N733113

Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm

CAS2L
N733075

Straight arm accessories for installation of two Berma operators L = 1500 mm Spain version

CAS1L
N733074

Straight arm accessories for installation of one Berma operator L = 1500 mm Spain version

CAS2
N733048

Straight arm accessories for installation of two Berma operators L = 1000 mm Spain version

CAS1
N733042

Straight arm accessories for installation of one Berma operator L = 1000 mm Spain version

CAPC1500
N733308

Control unit for Phobos BT Net and Virgo Net

ASW 350 XL RIG
P111565

Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm

ASW 350 XL ART
P111566

Vista SW XL articulated push arm. Max jamb dimens.: 150 mm

ASW 350 XL ARTL
P111567

Vista SW XL long articulated push arm. Jamb dimens. 150 mm

EXT ASW 350 XL 30
P111563 00001

Vista SW 260 XL arm connection, spacer

EXT ASW 350 XL 50
P111563 00002

Arm connection L=50 mm Vista SW XL, spacer

EXT ASW 350 XL 70
P111563 00003

Arm connection L=70 mm Vista SW XL, spacer

EXT ASW 350 XL 90
P111563 00004

Arm connection L=90 mm Vista SW XL, spacer

TA BIN
N999370

Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

BCP
D412377

Short welding base for PHEBE series operators (L 578 mm)

BLP
N733288

Long welding base for PHEBE series operators (L 1600 mm)

CTBP
N733299

Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT

CTA
N733120

2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators

CTA2
N733129

2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators

TL 60 KIT
P130018

Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release.

TL 60 M KIT
P130020

Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation.

SM504
P130015

Support with bearing for octagonal roller - screw type

SM505
P130014

Support for octagonal roller - cementing type

SM5014
N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

BLOCCANTI 40
P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
P130013

Anti-break-in block for shutters with slats of height 50 mm.

SPAC
P111678

Pair of locks (2) for glass leaf

RUL 60/3
P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6
P130008

Octagonal shutter winding roller Ø60 mm x 6 m.

CAL 60/100
P130002

Adjustable telescopic octagonal cover for RUL 60.

CAL 60/30
P130004

Octagonal cover for RUL 60.

CBO
D730251

Anchor base for MOOVI and GIOTTO series barriers

FAF
D730088

Fixed rest fork for booms for cementing to ground.

SB
D573003

Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

AT 502
N728028

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504
N728027

Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704
N728026

First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.

AT 706
N728030

Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m

AQ6
N728022

Complete 6 m rectangular boom for MICHELANGELO

ACC MCL ATT
N999386

Accessories pack for ATT 704 / 706 boom

BM
D730964

Anchor base for MICHELANGELO series barriers

GAM
D940007

Mobile rest leg for BGV barrier boom (not usable on BGV 30)

OMEGA AQ S/STEEL
N999509

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

OMEGA AQ
N999507

Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AT
N999513

Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

AT3
N728031

Complete 3 metre round boom for MOOVI/GIOTTO

AT5
N728032

Complete 5 metre round boom for MOOVI/GIOTTO

AQ3
N728033

Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
N728034

Complete 5 metre rectangular boom for GIOTTO and MOOVI

GA
D940008

Mobile support leg for barriers

GAMA
D940009

Подвижная опорная ножка с амортизатором для шлагбаумов

GAMA
D940009

Подвижная опорная ножка с амортизатором для шлагбаумов

AT6
N728038

Complete 6 metre round boom for MOOVI/GIOTTO

FAF 2
P120023

Rest fork for booms. For bolting to ground.

FAF 2R RAL
P120025 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

FAF 2 RAL
P120023 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

GA AQ AT
D940008

Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
D940009

Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

THERMO
P120018

Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

PPA TL 3200 O
P111664 00002

Clamps for glass leaf, 3200 mm, anodised

PPA TL FX
P111688

Vista TL glass leaf fixing clamp

PPA TL GD
P111689

Floor guides for Vista TL glass leaves

BAR C BA 4
P111451 00004

Double profile rubber safety edge with lip seals (L 4000 x H 60 mm)

TB
D221074

Plug for BIR C

BAR C BA 2
P111451 00002

Double profile rubber safety edge with lip seals (L 2000 x H 60 mm)

BAR C BA 6
P111451 00006

Double profile rubber safety edge with lip seals (L 6000 x H 60 mm)

TA
N999025

TA TAPPI BAR

PPA 10 108
P111159 00002

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 108

PPA 10 109
P111159 00003

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 109

PPA 10 110
P111159 00004

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 110

PPA 10 111
P111159 00005

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 111

PPA 10 112
P111159 00006

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 112

PPA 10 113
P111159 00007

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 113

PPA 10 114
P111159 00008

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 114

PPA 10 115
P111159 00009

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 115

PPA 10 116
P111159 00010

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 116

PPA 10 121
P111159 00013

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 121

PPA 10 208
P111159 00016

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 208

PPA 10 211
P111159 00019

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 211

PPA 10 212
P111159 00020

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 212

PPA 10 213
P111159 00021

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 213

PPA 10 214
P111159 00022

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 214

PPA 10 215
P111159 00023

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 215

PPA 10 216
P111159 00024

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 216

PPA 10 217
P111159 00025

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 217

PPA 10 219
P111159 00026

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 219

PPA 10 221
P111159 00027

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 221

PPA 10 223
P111159 00028

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 223

PPA 10 225
P111159 00029

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 225

PPA 10 227
P111159 00030

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 227

PPA 10 229
P111159 00031

Clamp for supporting all-glass doors, thickness 10 mm, for VISTA 229

PPA 12 110
P111159 00066

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 110

PPA 12 111
P111159 00067

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 111

PPA 12 112
P111159 00068

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 112

PPA 12 113
P111159 00069

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 113

PPA 12 115
P111159 00071

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 115

PPA 12 119
P111159 00074

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 119

PPA 12 123
P111159 00076

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 123

PPA 12 211
P111159 00081

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 211

PPA 12 213
P111159 00083

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 213

PPA 12 215
P111159 00085

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 215

PPA 12 217
P111159 00087

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 217

PPA 12 219
P111159 00088

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 219

PPA 12 221
P111159 00089

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 221

PPA 12 223
P111159 00090

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 223

PPA 12 225
P111159 00091

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 225

PPA 12 229
P111159 00093

Clamp for supporting all-glass doors, thickness 12 mm, for VISTA 229

KIT PPA 10
P111522 00001

Profile clamp kit for glass leaves 10mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

KIT PPA 12
P111522 00002

Profile clamp kit for glass leaves 12mm. Allows the fitting of approx. 6 clamps for leaves of width 1000mm

ERV
N733408

Electric lock for VISTA SL, SL C, TL (use in conjunction with BBV recommended)

X EF1
N999510

Electric brake for Wind Rmc and Rmb 230V

MOOVI PRM KIT
P120004

Hand protection kit against cutting, for MOOVI

CS 42
D211008

Pair of reduction half bearings for shafts of diameter 42 mm - Only for X130

CS 48
D211007

Pair of reduction half bearings for shafts of diameter 48 mm - Only for X130

IXIO/VIO RAIN COVER
P111769

Rain cover for IXIO/VIO sensors.

IXIO/VIO RAIN COVER
P111769

Rain cover for IXIO/VIO sensors.

VISTA SEL
D113722

Function selector for pedestrian door series VISTA SL, SL C, TL

REMOTE CONTROL
P111405

Remote control for adjusting and setting FALCON, EAGLE ONE and ACTIVE8

FALCON
P111407

Industrial presence sensor installable up to 7 m.

RIP
P111325

Multi-function active infrared radar, wide/narrow range

SPOTFINDER
P111406

IR curtain detector

VISTA SEL SW
D113789

Function selector Vista SW

VIO-DT2
P111653

Safety and bi-directional activation sensor, dual technology, monitored

VIO-DT1
P111654

Safety and mono-directional activation sensor, dual technology, monitored

IXIO-DT1
P111655

Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.

VIO-ST
P111656

Infrared safety sensor, monitored

4SAFE IR SAFETY SENSOR MONIT.SW/1MOD/700
P111657 00001

Monitored IR safety sensor for side-hung leaves, 1 module, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/700
P111657 00002

Monitored IR safety sensor for side-hung leaves, 2 modules, 700 mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/900
P111657 00003

Monitored IR safety sensor for side-hung leaves, 2 modules, 900 mm

PIG 12/ULISSE S
N733338

Z12 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 14/ULISSE S
N733336

Z14 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 18/ULISSE S
N733339

Z18 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

PIG 30/ULISSE S
N733337

Z30 pinion gear for reduction on industrial sectional doors, for 1 " (25,4 mm) shafts

COR 30
N733148

Z30 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

COR 40
N733149

Z40 gear kit with accessories for industrial sectional doors, for 1 " (25,4 mm) shafts

HIDE HINGE INF
N999524

Bottom fixed hinge for the installation of HIDE SW series operator

HIDE HINGE SUP
N999526

Top hinge for the installation of HIDE SW series operator

VISTA SL-107 SX
P111411 00002

VISTA SL-108 SX
P111412 00002

VISTA SL-109 SX
P111414 00002

VISTA SL-111 SX
P111416 00002

VISTA SL-112 SX
P111417 00002

VISTA SL-113 SX
P111418 00002

VISTA SL-114 SX
P111419 00002

VISTA SL-115 SX
P111420 00002

VISTA SL-116 SX
P111421 00002

VISTA SL-117 SX
P111422 00002

VISTA SL-119 SX
P111423 00002

VISTA SL-121 SX
P111424 00002

VISTA SL-123 SX
P111425 00002

VISTA SL-125 SX
P111426 00002

VISTA SL-208
P111413 00002

VISTA SL-209
P111414 00002

VISTA SL-211
P111416 00002

VISTA SL-212
P111417 00002

VISTA SL-213
P111418 00002

VISTA SL-214
P111419 00002

VISTA SL-215
P111420 00002

VISTA SL-216
P111421 00002

VISTA SL-217
P111422 00002

VISTA SL-219
P111423 00002

VISTA SL-221
P111424 00002

VISTA SL-223
P111425 00002

VISTA SL-225
P111426 00002

VISTA SL-227
P111427 00002

VISTA SL-229
P111428 00002

CARTER VISTA SL C-110/210 L=2200 O
P111415 00002

VISTA SL-107
P111411 00002

VISTA SL-108
P111412 00002

VISTA SL-109
P111414 00002

VISTA SL-110
P111415 00002

VISTA SL-111
P111416 00002

VISTA SL-125
P111426 00002

VISTA SL-123
P111425 00002

VISTA SL-112
P111417 00002

VISTA SL-121
P111424 00002

VISTA SL-119
P111423 00002

VISTA SL-117
P111422 00002

VISTA SL-116
P111421 00002

VISTA SL-115
P111420 00002

VISTA SL-114
P111419 00002

VISTA SL-113
P111418 00002

VISTA CASING TL2-207 L=1350 O
P111569 00002

VISTA CASING TL2-208 L=1500 O
P111570 00002

VISTA CASING TL2-209 L=1650 O
P111571 00002

VISTA CASING TL2-210 L=1800 O
P111572 00002

VISTA CASING TL2-212 L=2100 O
P111573 00002

VISTA CASING TL2-214 L=2400 O
P111574 00002

VISTA CASING TL2-216 L=2700 O
P111575 00002

VISTA CASING TL2-218 L=3000 O
P111576 00002

VISTA CASING TL2-220 L=3300 O
P111577 00002

VISTA CASING TL2-222 L=3600 O
P111578 00002

VISTA CASING TL2-224 L=3900 O
P111579 00002

VISTA CASING TL2-226 L=4200 O
P111580 00002

VISTA CASING TL2-228 L=4500 O
P111581 00002

VISTA CASING TL2-230 L=4800 O
P111582 00002

VISTA CASING TL2-232 L=5100 O
P111583 00002

VISTA CASING TL4-416 L=2600 O
P111584 00002

VISTA CASING TL4-418 L=2900 O
P111585 00002

VISTA CASING TL4-420 L=3200 O
P111586 00002

VISTA CASING TL4-422 L=3500 O
P111587 00002

VISTA CASING TL4-424 L=3800 O
P111588 00002

VISTA CASING TL4-426 L=4100 O
P111589 00002

VISTA CASING TL4-428 L=4400 O
P111590 00002

VISTA CASING TL4-430 L=4700 O
P111591 00002

VISTA CASING TL4-432 L=5000 O
P111592 00002

VISTA CASING TL4-434 L=5300 O
P111593 00002

VISTA CASING TL4-436 L=5600 O
P111594 00002

VISTA CASING TL4-438 L=5900 O
P111595 00002

VISTA CASING TL4-440 L=6200 O
P111596 00002

VISTA CASING TL4-442 L=6500 O
P111597 00002

VISTA CASING TL4-444 L=6800 O
P111598 00002

FANFOLD GAP TICKETS SACS
D191173

Scatola ticket tipo fanfold con gap, 4000pz (logo SACS) (v2)

TLIGHTS
P800117

Top cover with lights. Colour RAL 7015

KIT LIGHT1
P120001 00002

Lights for booms over 4,5 m

KIT LIGHT
P120001 00001

Lights on boom 3 - 4,5 m

MCL LAMPO KIT
P120006

Integrated flashing light. The MCL CARD KIT is needed for operation

MCL LIGHT KIT
P120005 00001

Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation

ACOUSTIC DETECTOR
D113705

Adjustable acoustic detector for sirens

RAY X SA 230V
D113721 00002

Flashing beacon without antenna for 230 V motors

RAY X SA 24V
D113721 00003

Flashing beacon without antenna for 24 V motors

PCR
P123024

Metal guard for RAY X

CMS
D831020

Sign

B 00 R02
P123025

Wall mounting for B LTA series flashing beacons

STOPPY ALARM
P800075

Anti-theft kit: to be ordered separately, assembled during production

TLIGHTS - RAL
P800117 00102

Top cover with lights. RAL colour to order.

TCAP
P800108

Top cover. Colour RAL 7015

TCAP - RAL
P800108 00102

Top cover. RAL colour to order.

TM2
D111054 00001

Twin channel miniature transmitter

Timer
P130024

Weekly programmer for REEL RADIO or external ER-1 receiver

TEO4
D111363

TEO2
D111362

CLIP B 00 R04
N999522

Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

CLIP1 B 00 R03
N999521

Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs

B EBA WIE INPUT/OUTPUT
P111467

Expansion card for connection of WIEGAND accessories, compatible with U-Link control units

B EBA WIE INPUT/OUTPUT
P111467

Expansion card for connection of WIEGAND accessories, compatible with U-Link control units

SCS
P111323

Serial connection board for HYDRA R

ECOSOL DOUBLE
D113732

Expansion board with batteries Included

ECOSOL DOUBLE
D113732

Expansion board with batteries Included

SCHEDA MCL KIT
P120009

Control board for KIT MCL LIGHT and KIT MCL LAMPO

FLC 8K2
P111400

Interface for connecting one or more 8K2 type edges

RAU
P111449

Wired connection board for BFT plug-in receivers

ME110
D111501

SFQ
N999070

Set of SD and QSG panel fixing brackets

CP SD
N999369

Set of cable clamps for SD panel

UNIPOWER
D121501

U-PROG
P111529

Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

QSG2
D223040

QSG2 ENCLOSURE 8.5x12x5"

SD BOX
D223050

SD BOX WITH 2 HOLES DIA. 38

CPEM
D223066

Control panel box for control units. Dimensions 195x237 mm depth 100 mm

CPEL
D223072

Large control panel box for control units. Dimensions 315x218 mm depth 125 mm

BT BAT1
P125007

Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor

ECOSOL CHARGER
N999477

Battery chargers for ECOSOL BOX and ECOSOL DOUBLE

MCL BT A BAT KIT
P125038

Set of backup batteries for MICHELANGELO BT A barriers

STOPPY BAT
P975001

Backup battery kit to allow bollards to stay up in case of no power

BT BAT2
P125009

Set of backup batteries for ARES

SB BAT
P125002

SB BAT emergency battery kit for DEIMOS BT

SL BAT1
P125033

SL BAT1 emergency battery kit for DEIMOS ULTRA BT

BBV SLC TL
P111503

Battery powered anti-panic device for VISTA SL C, TL

BBT BAT
P125020

Set of backup batteries for THALIA, THALIA P, ZARA and PHEBE

BBV SW 350 MXL
P111564

Emergency battery kit for Vista SW MXL, compatible with SXL with external installation

PRC
P111041

Pneumatic relay for BIR edge with 1 pressure switch

PRC2
P111042

Pneumatic relay for BAR edge with 2 pressure switches

ECB DX
D121016

Right-hand horizontal solenoid lock, 12/24 V

ECB VERTICALE
D121018

Vertical solenoid lock, 12/24 V

ST
P115003

Automatic bolt release for sectional doors

SET/S
N733069

External release for insulated sectional and overhead doors of thickness up to 50 mm.

RCA
N733421

Lever release with steel cable, length 3,5 m. Compatible with BOX.

RCAL
N733422

Lever release with steel cable, length 7 m. Compatible with BOX.

SM1
P115005

External manual release for overhead garage door (1 operator)

SM2
P115001

External manual release for overhead garage door (2 operators)

SEB
N733020

External key release for BERMA, FORB, IGEA LB and IGEA LB BT

SCP
N733502

Release for ELI AC A, ELI BT A and SUB BT with personalized key.

CRC SPARE KEY
D531097 00001

Release key for INTRO model key selector and EBP model electric lock.

SIBOX
N574005

Empty wall-mounted safe for external release and control keypad Dimensions 179,5 x 122 x 92 mm

MOX
N733036

External release system to be inserted in SIBOX safe

BOX
N574039

Wall cabinet for release with steel cable and electric control; cable not included

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

RME 1 BT
P111274

24 V single channel metal object detector with installation base

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

U-BASE
P111510

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

U-BASE ANDROID
P111523

Management and programming software for BFT control and receiver units. Version for Android smartphones and tablets, Bluetooth connection

CKK
N999592

Pack of tabs for ARGO series and PEGASO series operators

CA2C
N733041

Accessories for the installation of two BERMA series operators on overhead door (curved arms)

PRV TL T
P111660

Vista tl anodised closing profile, length 6,8 m

PRV AA SL
P111681

Leaf attachment profile for Vista SL.

CA1
N733038

Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

CA2
N733040

Straight arm accessories for installation of two BERMA series operators on overhead door

IDROLUX WINTER
I101615

Hydraulic oil tank for lower temperatures. Always mix with oil of the same colour.

THEKE B PRA 01
P125018

Metal protection box for ARES and ICARO series sliding operators

TSWP 350 XL
P111568

Profiles Vista SW double, 1,5 m.

WMP SL SLC
P111680

Contains 2 crossbeam support profiles of length L = 1 m each

ACV30
P111538

Vandal-proof protection for AKTA photocells

ACV20
P903024

Vandal-proof protection for DESME photocells

PHP BI
P903022

Dual-face adapter for THEA/DESME photocells

MOOVI 130 KIT
P120002

Support for fitting CELLULA 130 on MOOVI/GIOTTO enclosure in line with boom

KIT BARR RFL
P120007 00001

Support for fitting CELLULA 130 on MICHELANGELO enclosure in line with boom

KIT BARR RFL
P903015 00001

Support for fitting RFL on MICHELANGELO enclosure in line with boom

PHP ADA CC
P903021

Pair of adapters for the installation of THEA/DESME photocells on CC posts

PHP2
P903019

Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm

APL
P903020

Pair of foundation plates for PHP posts

CSC 50
P903008

Aluminium column for photocell mod. CELLULA 50 and selector mod. INTRO

PRO 130
P111081

Anodised aluminium vandal-proof guard for CELLULA 130

CC130
P903005

Pair of aluminium posts for CELLULA 130 photocells

CC130/2
P903006

Pair of aluminium posts with double fitting for CELLULA 130 photocells

CSC 130
P903007

Aluminium post for CELLULA 130 photocell and INTRO selector, plus CC130 post

CC50
P903004

Pair of aluminium posts for CELLULA 50 and CELLULA RFL photocells

CCI
D221573

Recessed container for CELLULA 50 and INTRO.

CM RFL
P903014

CELLULA RFL wall mounting support

CC RFL
P903013

CELLULA RFL and S RFLP mounting support on CC posts

PHP ADA
P903025

Pair of adapters for the installation of AKTA photocells on PHP posts

PHP BA1
P903023

Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures

PHP
P903018

Pair of aluminium posts for THEA/DESME series photocells Height 522 mm

PT130
P111058

PROTECTION COVER FOR FL130B

IT23
P111399

Connection interface for CELLULA RFL in accordance with EN12453 Standard

DCW BAT
N999465

Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30

KIT CELLULA 180 AT
P111460

KIT CELLULA 180 + DCW COVER

KIT FPA1
P111683

FPA kit with pair of photocells and brackets for Vista

KIT FPA2
P111685

FPA kit with two pairs photocells and brackets for Vista

KIT FPA MA-I2
P111687

FPA MA 12 kit with two pairs photocells and brackets for Vista

SPC
D121611

External button panel with 2 start-stop buttons.

SPC2
D121612

External button panel with 2 open-close buttons.

SPCE
D121613

External button panel with mushroom-head emergency button.

SPC3
D121619

Open stop close button panel.

SELETTO E
P121013

External digital button panel with metal body and stainless steel keys

LCM
D121011

Magnetic key reader. For column mounting - see mod. CLC

CM
D121012

Magnetic key for LCM reader

PUSH PLATE
P111677

Activation button

MAGIC SWITCH
P111676

Activation touch button

ANEM
P111182

Anemometric ​​sensor with encoder for wind

CREP
P111183

Twilight sensor

CLONIX 2
D111662

Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.

CLONIX 2 2048
D111664

Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.

MOP
D111713 00001

Accessory for adding an output channel to RTD

AEL 433
D113632

Antenna for 433 MHz radio remote control with 4 m cable

RE/T
D111144