Motors and complete automation kits for sliding gates up to 600 kg

DEIMOS BT KIT A400 FRA

Product code R925267 00002
  • DIMENSIONAL DIAGRAM
technical design DEIMOS BT A
Technologies
  • A precise, safe and reliable technology.
    Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
    Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
    The efficiency of the technology is a guarantee of the product's reliability.

  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Complete kit 24 V for sliding gates weighing up to 400 kg. Leaf speed 12 m/min.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
List of products contained in the kit

DEIMOS BT A400

Operator 24 V for sliding gates up to 400 kg in weight. Leaf speed 12 m/min.

Open

MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

Open

RADIUS B LTA 24 R1

Flashing light with incorporated antenna for motors with power supply 24 V.

Open

DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Open
Technical Data
Type of limit switch Electromechanical
Impact reaction D-track
Slowdown Yes
U-Link No
Board power supply 230 v
Power input 50 w
Locking Mechanical
Release Lever-operated with personal key
Frequency of use Intensive
Protection rating Ip24
Environmental conditions -20 ÷ 55 °c
Max. door/gate weight 400 kg
Supply voltage AC 24 v
Pinion module 4
Gate speed 12 m/min
Accessories

Recommended accessories.

  • CVZ-S Cod. N999320 steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.
    steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.

  • SFD Cod. N999151 Base plate for DEIMOS series (supplied with operator). Base plate for DEIMOS series (supplied with operator).

  • SL BAT2 Cod. P125035 Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A. Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

  • CP Cod. D221073 plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.
    plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.

  • CVZ Cod. D571053 steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 1000 kg.
    steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 1000 kg.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.