Kit for swing gates up to 1.8 m and 180 kg in weight with irreversible hydraulic operators for Semi intensive use. Cycle time 20 s.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
|Power consumption||240 W|
|Max. width of door/gate wing||1.8 m|
|Impact reaction||Hydraulic clutch|
|Max. weight of door/gate wing||180 kg|
|Frequency of use||Semi intensive|
|Useful rod stroke||250 mm|
|Maximum angle||112 °|
|Environmental conditions||-10 ÷ 60 °C|
|Cycle time||20 s|
|Control unit||RIGEL 6|
|Type of limit switch||work time|
|Board power supply||230 V|
|Motor voltage||230 V|
ALCOR AC A
Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...