Kit for swing gates up to 2.3 m, 300 kg in weight. Hydraulic operators with useful travel 270 mm, max angle 123 °, locking Hydraulic closing and release Triangle key. Cycle time 23 s. Power input 250 W.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.
MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
Q.BO KEY WM
Key selector for outdoor use with double contact.
RADIUS B LTA 230 R1
Flashing light with incorporated antenna for motors with power supply 230 V.
|Control unit||RIGEL 6|
|Motor voltage||230 V|
|Power input||250 W|
|Max. width of door/gate wing||2.3 m|
|Max. weight of door/gate wing||300 kg|
|Useful rod stroke||270 mm|
|Maximum angle||123 °|
|Cycle time||23 s|
|Type of limit switch||work time|
|Impact reaction||Hydraulic clutch|
|Frequency of use||very intensive|
|Environmental conditions||-10 ÷ °C|
ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide...
Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
Board power supply: 230V single-phase.
Operator power supply: 230V single phase 500W max.
Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
Main functions: fast closing, pulse blocking, gate open indicator light.
ARB LUX Cod. N733426Adjustable front and rear bracket for LUX operator.Adjustable front and rear bracket for LUX operator.
ARB LUX G Cod. N733474Adjustable front and rear bracket for LUX G operator.Adjustable front and rear bracket for LUX G operator.
PLE Cod. D730178Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.
NAT Cod. N999131Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.
ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.
CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.
ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.