Extremely robust, high-performing sliding gate motor

ICARO ULTRA AC A2000

Product code P925238 00002
  • DIMENSIONAL DIAGRAM
technical design ICARO ULTRA AC A
Technologies
  • The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

  • A contactless high-resolution device for detecting obstacles.
    It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

  • For safe transmission.
    BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
    When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
    The algorithm generated then prevents the reproduction of the code.

  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Operator 230 V for sliding gates up to 2000 kg with absolute encoder. Leaf speed 9 m/min. Limit switch Magnetic. Equipped with mechanical safety clutch, torque management via D-track technology and gear unit in oil bath.

Built-in control panel
LEO B CBB L02
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Type of limit switch Magnetic
Impact reaction Mechanical clutch + encoder
Slowdown Yes
U-Link Yes
Control unit Leo b cbb l02
Board power supply 230 v
Power input 750 w
Locking Mechanical
Release Lever-operated with personal key
Frequency of use Very intensive
Protection rating Ip55
Environmental conditions -20 ÷ 55 °c
Max. door/gate weight 2000 kg
Supply voltage AC 230 v
Pinion module 4
Gate speed 9 m/min
Video
Icaro AC A2000
Icaro AC A2000, 230V sliding gate operator for very intensive use
Show
Icaro Ultra AC A 2000
Icaro Ultra AC A 2000 sliding gate operator
Show
Accessories

Recommended accessories.

  • SFI Cod. N999156 Base plate for ARES and ICARO (supplied with operator). Base plate for ARES and ICARO (supplied with operator).

  • CVZ Cod. D571053 steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.
    steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.

  • CVZ-S Cod. N999320 steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.
    steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.

  • B EBA RS 485 LINK Cod. P111468 Expansion board for connection of central units with serial controls management. Expansion board for connection of central units with serial controls management.

  • THEKE B PRA 01 Cod. P125018 Metal protection box for ARES and ICARO series sliding operators. Metal protection box for ARES and ICARO series sliding operators.

  • CFZ Cod. D571054 galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
    Max. load capacity 2000 kg.
    galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
    Max. load capacity 2000 kg.

  • CP Cod. D221073 plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.
    plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.