VIRGO SMART BT A 20 SLAVE

Product code P930130 00002 International code 2601299

Irreversible electromechanical operator 24 V for swing gates weighing up to 200 kg and 2 m long.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Motor voltage 24 V
Power consumption 110 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 200 kg
Maximum angle 120 °
Cycle time 14 s
Type of limit switch Electromechanical
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Electronic torque limiter
Frequency of use Semi intensive
Protection rating IP44
Environmental conditions -20 ÷ 55 °C
Interconnectivity no
Control unit
Board power supply ---
LAS
N728052

VIRGO BT A slide lever

AAP
N999735

VIRGO SMART BT A misaligned doors accessory

AMV
N998600

Virgo Smart BT A 20 mechanical stop KIT

RCA
N733421

Lever release with steel cable, length 3.5 m. Compatible with BOX.

RCAL
N733422

Lever release with steel cable, length 7 m. Compatible with BOX.

VIRGO BAT
P125008

Set of backup batteries for VIRGO

Swinging gates
Electromechanical automation systems for swinging gates
Show
Virgo Smart BTA
Virgo Smart BTA
Show

An unexpected error occurred: please reload the page or try again later.