MAXIMA ULTRA 68

Professional electromechanical barriers

catalog (PDF)

Professional electromechanical barriers

Designed and developed to operate in a wide variety of conditions such as large car parks, motorway tollgates with frequent reversing, industrial installations. Equipped with U-Link protocol, they allow integration in Parking Management or Building Management systems Range of professional 230 Vac electromechanical barriers with speed variator and three-phase induction motor for high frequency of use. Possibility of setting the useful passage from electronic control unit. Mechanical crankshaft movement (anti-vandalism system) which can deliver fluidity of movement and balance to the bar by also controlling its soft opening and closing. Three-phase motor with inverter. Oil bath gear motor.

Professional electromechanical barriers

Technologies

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

Inverter

Motor rotation constantly under control The inverter is an electronic device allowing motor rotation speed to be controlled at any moment, ensuring safety and reliability of the installation, and even extending its life. This is because the inverter reduces the stresses on mechanical parts, subjecting them to less stress. The system also allows management of automation opening and closing times.

Inverter with three-phase induction motor

Allows precise control and management of bar/boom speed in a specific range of Bft barriers and also provides excellent dynamic performance in acceleration and slowdown, ensuring extreme quietness.

Reduction unit in oil bath

The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

Crank handle system

Together with irreversibility of the reduction unit, this device included in a specific range Bft barriers provides intrinsic anti-vandal protection, preventing unauthorised opening of the gate.

Three-phase induction motor

This device, included in a specific range of Bft barriers, allows the motor to be maintenance-free and offers extreme reliability and quietness. It can also be used in hazardous areas, as it does not produce sparks.

Inductive encoder

A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

Products list

    MAXIMA ULTRA 68 SM

    More
    Professional electromechanical barriers

    230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling da 4 ,0 a 8,0 m gates. Opening time da 4,5 a 6,0 s with deceleration. Maximum barrier length: 8 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. Colour RAL 7015

      MAXIMA ULTRA 68 SM - RAL

      More
      Professional electromechanical barriers

      230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling da 4 ,0 a 8,0 m gates. Opening time da 4,5 a 6,0 s with deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. RAL colour to order.

        MAXIMA ULTRA 68 SM + ASS SPRING

        More
        Professional electromechanical barriers

        230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling da 4 ,0 a 8,0 m gates. Opening time da 4,5 a 6,0 s with deceleration. Maximum barrier length: 8 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Includes fitting of springs and balancing. Colour RAL 7015. Verificare la disponibilità del colore ed il tipo di finitura con il commerciale di riferimento.

          MAXIMA ULTRA 68 SM + ASS SPRING RAL

          More
          Professional electromechanical barriers

          230 V electromechanical barrier with asynchronous three-phase motor and inverter, for controlling da 4 ,0 a 8,0 m gates. Opening time da 4,5 a 6,0 s with deceleration. Maximum barrier length: 8 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Includes fitting of springs and balancing. RAL colour to order

          Accessories

          MLC7.5
          P120059

          White spring - MAXIMA Ultra 68. Ref. spring table

          MLC9
          P120060

          Yellow spring - Maxima Ultra 68. Ref. spring table

          MLC9.5
          P120061

          Purple spring - Maxima Ultra 68. See springs table

          MLC11
          P120081

          Black spring - Maxima Ultra 68. See springs table

          ATML60
          P120041 00001

          Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

          ATML EXT2
          P120042

          Extension L=2m for bar model ATML 60. Lights and rubber not included.

          IS ATML
          P120078

          Internal reinforcement for ATML rods

          OMEGA ATML U
          P120046 00001

          Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

          OMEGA FRC ATML U
          P120047 00001

          Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

          BRACKET FRC
          P120090

          Anchoring bracket for RST-ATM skirts. Only compatible with OMEGA FRC ATML U lock

          PCA ATM 5
          P120053 00002

          Rubber protection (red) for fitting on bar L = 5 m max.

          PCA ATM 8
          P120053 00003

          Protection rubber (black) for fitting on bars from L = 6÷8 m.

          ALLU 2 MAXIMA ULTRA
          P120075

          Power supply for ATM LIGHT Kit on Maxima Ultra

          KIT ATM LIGHT 3 R/G 2W
          P120077 00001

          Red-green LED lights kit for fitting on ATM bars up to 3m.

          KIT ATM LIGHT 5 R/G 2W
          P120077 00002

          Red-green LED lights kit for fitting on ATM bars up to 5m.

          KIT ATM LIGHT 8 R/G 2W
          P120077 00003

          Red-green LED lights kit for fitting on ATML bars up to 8 m.

          TP MAXIMA ULTRA
          P120076

          Thermal probe for Maxima Ultra barriers

          EBB KIT ATML
          P120079

          Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

          FAF UNI R
          P120080

          Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

          GA ATM
          P120050

          Adjustable suspended foot, powder coated cataphoresis treated.

          FULL-SKIRT PRO
          P120105

          Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for anchoring the first module to the barrier body.

          Full symmetrical rack (top and bottom) for BOOM PS barriers. Module length L = 2 m. Does not include BRACKET SKIRT PRO required for...

          RST ATM
          P120049

          Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

          BRACKET SKIRT PRO 68 DOUBLE PB
          P120106

          Connection bracket between barrier body and rack FULL SKIRT-PRO when using the KIT-PB Double Xtreme 68 fork lock.

          SRV DIN
          P120032

          Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

          Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

          RME 2
          P111001 00003

          230 V dual channel metal object detector with installation base

          FCS MU68
          P120035

          2 additional limit switches for Maxima Ultra 6 - 8 m

          LOOP DETECTOR PRO 230V
          P111786

          Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

          Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

          RME 1 BT
          P111274

          24 V single channel metal object detector with installation base

          PS JOINT
          P120113

          Joint for BOOM PS booms.

          An unexpected error occurred: please reload the page or try again later.