MOOVI 30 RMM INOX
Product code P940027 00004Barrier with 230 V power supply for openings of up to 3 m and opening time of 8 s. Impact resistance via encoder. Stainless steel structure
Main features
Control unit with programming display and built-in dual channel radio receiver.
They enable useful passages up to 6 m to be covered thanks to the new round boom
Also available in Moovi 30S rapid version with opening speed of 1.5s (plus slowing) and intensive use.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerFor safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Control unit | LEO MV D |
Motor power supply | 230 V |
Power consumption | 300 W |
Type of limit switch | Electronic |
Locking | Mechanical |
Release | Personal key |
Impact reaction | encoder |
Frequency of use | Semi intensive |
Protection rating | IP24 |
Environmental conditions | -20 ÷ 50 °C |
Interconnectivity | no |
Slowdown | Yes |
Clear opening | 3 m |

LEO MV D

CBO
Cod. D730251
Anchor base for MOOVI and GIOTTO series barriers

AQ3
Cod. N728033
Complete 3 metre rectangular boom for GIOTTO and MOOVI

AQ5
Cod. N728034
Complete 5 metre rectangular boom for GIOTTO and MOOVI

OMEGA AQ
Cod. N999507
Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AQ S/STEEL
Cod. N999509
Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

AT3
Cod. N728031
Complete 3 metre round boom for MOOVI/GIOTTO

AT5
Cod. N728032
Complete 5 metre round boom for MOOVI/GIOTTO

AT6
Cod. N728038
Complete 6 metre round boom for MOOVI/GIOTTO

OMEGA AT
Cod. N999513
Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

FAF 2
Cod. P120023
Rest fork for booms. For bolting to ground.

ACTR
Cod. N999608
Pack of 12 additional reflective labels (1 pack already included with each boom)

ART 90 Q
Cod. N728051
90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

SB
Cod. D573003
Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

KIT LIGHT
Cod. P120001 00001
Lights on boom 3 - 4.5 m

KIT LIGHT1
Cod. P120001 00002
Lights for booms over 4.5 m

PCA N3
Cod. P120028 00001
Top and bottom rubber cover profile for booms of 3 m max.

PCA N4
Cod. P120028 00002
Top and bottom rubber cover profile for booms of 4 m max.

PCA N5
Cod. P120028 00003
Top and bottom rubber cover profile for booms of 5 m max.

PCA N6
Cod. P120028 00004
Top and bottom rubber cover profile for booms of 6 m max.

FAF 2R
Cod. P125025

ZFAF2
Cod. P120026
Additional anchor plates for cementing FAF2 forks to ground.

GAM
Cod. D940007
Mobile rest leg for BGV barrier boom (not usable on BGV 30)

GA AQ AT
Cod. D940008
Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

GAMA AQ AT
Cod. D940009
Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) -

BIR C
Cod. N190104
Rubber safety edge (H 30 mm), price per m

VENTIMIGLIA NS
Cod. P111401 00001
Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard)

THERMO
Cod. P120018
Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

SCS 1
Cod. P111376
Serial board for connection to zone and opposing leaves for control units with display While stocks last

RME 2
Cod. P111001 00003
230 V dual channel metal object detector with installation base

SPIRA 2X1
Cod. D110926 00001
Magnetic loop 2 x 1 m