SUB EL DX

Product code P930014 00005

In-ground 230 V hydraulic operator Reversible for hinged leaves up to 3.5 m. Manoeuvre time 33 s. Right operator.

Main features
  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

  • The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

  • Control unit with programming display and new, simplified scenario-based programming

Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Power consumption 250 W
Impact reaction Hydraulic clutch
Max. width of door/gate wing 3.5 m
Frequency of use very intensive
Max. weight of door/gate wing 800 kg
Protection rating IP67
Maximum angle 130 °
Environmental conditions -10 ÷ 60 °C
Cycle time 33 s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown no
Board power supply 230 V
Locking Solenoid Lock
Motor voltage 230 V
Release Reversible
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

CLS/82
D610256

Triangular release key for SUB operators l=82 mm

FCS DX
N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

FCS SX
N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS DX
N733066 00001

Foundation box designed for fitting the SUB right-hand operator

CPS SX
N733066 00002

Foundation box designed for fitting the SUB left-hand operator

CPS G
N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

BSC
N728002

Arm for installation of SUB out of the gate axis

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

EBP AC A 230V 50/60HZ
P123032 00001

230V vertical electric lock.

EBP AC A 120V 50/60Hz
P123032 00002

120V vertical electric lock.

Swinging gates
Hydraulic automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.