Motors and kit for the automation of roller shutters

REEL EASY RUA A30 230V R45

Product code P910047 00003
  • DIMENSIONAL DIAGRAM
technical design REEL EASY RUA

Radio operator for roller shutters. Max shutter weight 55 kg. Max torque 30 nm and power input 235 W. Shaft rotation speed 16 Rpm.

PLUS
  • The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action

  • New range complete with 1 to 5-channel PAD radio controls, features a modern design to suit any home context

  • New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
U-Link No
Control unit Built-in
Power input 235 w
Locking Mechanical
Frequency of use Residential
Protection rating Ip44
Environmental conditions -10 ÷ 40 °c
Motor power supply 230 v
Outer diameter 60 mm
N° limit switch revolutions 28
Type of end switch Electronic
Accessories

Recommended accessories.

  • RUL 60/1,5 Cod. P130010 Octagonal shutter winding roller Ø60 mm x 1.5 m. Octagonal shutter winding roller Ø60 mm x 1.5 m.

  • AD5031 Cod. N999350 Deprat LP89 adapter. Deprat LP89 adapter.

  • ELBA Cod. D113716 00002 ELBA control panel. ELBA control panel.

  • CAL 60/30 Cod. P130004 Octagonal cover for RUL 60. Octagonal cover for RUL 60.

  • AD5036 Cod. N999397 Octagonal adapter 60 PL. Octagonal adapter 60 PL.

  • MM9 Cod. N999329 45 ° universal joint for manual operation. 45 ° universal joint for manual operation.

  • SM504 Cod. P130015 Support with bearing for octagonal roller - screw type. Support with bearing for octagonal roller - screw type.

  • SM5014 Cod. N999325 Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm). Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

  • ER 1 Cod. P130025 External receiver for REEL RUA series operators. Compatible with PAD series transmitters. External receiver for REEL RUA series operators. Compatible with PAD series transmitters.

  • AD5030 Cod. N999349 Deprat LP62 adapter. Deprat LP62 adapter.

  • CAL 60/100 Cod. P130002 Adjustable telescopic octagonal cover for RUL 60. Adjustable telescopic octagonal cover for RUL 60.

  • MIME AC Cod. D113824 433 MHz 2-channel indoor receiver.
    2 independent outputs.
    230 Vac power supply.
    30-position memory.
    Operating mode: monostable, bistable,...
    433 MHz 2-channel indoor receiver.
    2 independent outputs.
    230 Vac power supply.
    30-position memory.
    Operating mode: monostable, bistable, timed, motor control.

  • AD5035 Cod. N999396 Ogive adapter Ø78 mm. Ogive adapter Ø78 mm.

  • SHEDIR B CBC 02 L01 Cod. P111515 Control unit for wired centralisation. For 2 operators (or 2 groups of operators). Control unit for wired centralisation. For 2 operators (or 2 groups of operators).

  • MIME TX Cod. D113831 two-channel miniaturized 433 Mhz transmitter. two-channel miniaturized 433 Mhz transmitter.

  • MM8 Cod. N999328 Manual operation eye-ring. Manual operation eye-ring.

  • MITTO B RCB02 R1 Cod. D111904 Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • MM12 Cod. N999332 1.5 m rigid boom with hook for manual operation. 1.5 m rigid boom with hook for manual operation.

  • Timer Cod. P130024 Weekly programmer for REEL RADIO or external ER-1 receiver. Weekly programmer for REEL RADIO or external ER-1 receiver.

  • BLOCCANTI 50 Cod. P130013 Anti-break-in block for shutters with slats of height 50 mm. Anti-break-in block for shutters with slats of height 50 mm.

  • SM5013 Cod. N999324 Wall-mounted orientable support for operators with manual release. Wall-mounted orientable support for operators with manual release.

  • MITTO B RCB04 R1 CLEAR ICE Cod. D111947 Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: clear ice white. Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: clear ice white.

  • AD5029 Cod. N999348 Round adapter Ø63x1.5 mm. Round adapter Ø63x1.5 mm.

  • RUL 60/6 Cod. P130008 Octagonal shutter winding roller Ø60 mm x 6 m. Octagonal shutter winding roller Ø60 mm x 6 m.

  • AD5034 Cod. N999395 ZF 54 adapter. ZF 54 adapter.

  • AD5038 Cod. N999547 Metallic ogive adapter Ø70 mm. Metallic ogive adapter Ø70 mm.

  • CREP Cod. P111183 Twilight sensor. Twilight sensor.

  • MM11 Cod. N999331 1.5 m articulated boom with hook for manual operation. 1.5 m articulated boom with hook for manual operation.

  • RB Cod. P121016 4-channel wall-mounted radio control with rolling code. 4-channel wall-mounted radio control with rolling code.

  • MITTO B RCB04 R1 Cod. D111906 Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • BLOCCANTI 40 Cod. P130001 Anti-break-in block for shutters with slats of height 40 mm. Anti-break-in block for shutters with slats of height 40 mm.

  • Pad Rcd 01 R Cod. D111909 1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver. 1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

  • AD 5027 Cod. N999323 Drive wheel and limit switch adapter for RUL60. Drive wheel and limit switch adapter for RUL60.

  • AD5028 Cod. N999327 Octagonal adapter Ø70 mm zamak. Octagonal adapter Ø70 mm zamak.

  • Pad Rcd 01 F Cod. D111911 Wall-mounted remote control 1 channel for radio tubes. Wall-mounted remote control 1 channel for radio tubes.

  • SCS 1 Cod. P111376 Expansion card. Expansion card.

  • RUL 60/3 Cod. P130012 Octagonal shutter winding roller Ø60 mm x 3 m. Octagonal shutter winding roller Ø60 mm x 3 m.

  • AD5032 Cod. N999351 ZF 64 adapter. ZF 64 adapter.

  • MIME PAD Cod. P121028 4-channel wall-mounted radio control with rolling code. 4-channel wall-mounted radio control with rolling code.

  • ELBA BU Cod. D113717 00002 Control panel, max 230V, for roller shutters or roll-up doors. Control panel, max 230V, for roller shutters or roll-up doors.

  • AD5037 Cod. N999546 Plastic ogive adapter Ø70 mm. Plastic ogive adapter Ø70 mm.

  • ANEM Cod. P111182 Anemometric ​​sensor with encoder for wind. Anemometric ​​sensor with encoder for wind.

  • MM10 Cod. N999330 90 ° universal joint for manual operation. 90 ° universal joint for manual operation.

  • SM505 Cod. P130014 Support for octagonal roller - cementing type. Support for octagonal roller - cementing type.

  • SM5015 Cod. N999326 Wall-mounted two-position orientable support for operators with manual release. Wall-mounted two-position orientable support for operators with manual release.

  • Pad Rcd 05 R Cod. D111910 5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver. 5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.