Reversible hydraulic operator for swing gates up to 4.5 m. 500 kg in weight. Cycle time 28+slowdown s. Useful travel 390 mm. max angle 123 °.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
|Control unit||RIGEL 6|
|Board power supply||230 V|
|Motor voltage||230 V|
|Power input||250 W|
|Max. width of door/gate wing||4.5 m|
|Max. weight of door/gate wing||500 kg|
|Useful rod stroke||390 mm|
|Maximum angle||123 °|
|Cycle time||28+slowdown s|
|Type of limit switch||work time|
|Impact reaction||Hydraulic clutch|
|Frequency of use||very intensive|
|Environmental conditions||-10 ÷ 60 °C|
ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide...
Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
Board power supply: 230V single-phase.
Operator power supply: 230V single phase 500W max.
Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
Main functions: fast closing, pulse blocking, gate open indicator light.
NAT Cod. N999131Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.
ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.
CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.
ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.