MOOVI 30S RAL

Product code P940064 00102

Barrier with 230 V power supply for clear opening up to 3 m and opening time 1.5+slow s . Impact resistance by means of Encoder. RAL colour as requested.

PLUS
  • Control unit with programming display and built-in dual channel radio receiver.

  • They enable useful passages up to 6 m to be covered thanks to the new round boom

  • Also available in Moovi 30S rapid version with opening speed of 1.5s (plus slowing) and intensive use.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design MOOVI
Control unit LEO MV D
Motor power supply 230 V
Power input 300 W
Type of limit switch Electronic
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Encoder
Useful passage 3 m
Frequency of use intensive
Protection rating IP24
Environmental conditions -20 ÷ 50 °C
U-Link no

CBO Cod. D730251Anchor base for MOOVI and GIOTTO series barriers.Anchor base for MOOVI and GIOTTO series barriers.

AQ3 Cod. N728033Complete 3 metre rectangular boom for GIOTTO and MOOVI.Complete 3 metre rectangular boom for GIOTTO and MOOVI.

AQ5 Cod. N728034Complete 5 metre rectangular boom for GIOTTO and MOOVI.Complete 5 metre rectangular boom for GIOTTO and MOOVI.

OMEGA AQ Cod. N999507Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.

OMEGA AQ S/STEEL Cod. N999509Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.

AT3 Cod. N728031Complete 3 metre round boom for MOOVI/GIOTTO.Complete 3 metre round boom for MOOVI/GIOTTO.

AT5 Cod. N728032Complete 5 metre round boom for MOOVI/GIOTTO.Complete 5 metre round boom for MOOVI/GIOTTO.

AT6 Cod. N728038Complete 6 metre round boom for MOOVI/GIOTTO.Complete 6 metre round boom for MOOVI/GIOTTO.

OMEGA AT Cod. N999513Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO.

FAF 2 Cod. P120023Rest fork for booms. For bolting to ground.Rest fork for booms. For bolting to ground.

ACTR Cod. N999608Pack of 12 additional reflective labels (1 pack already included with each boom).Pack of 12 additional reflective labels (1 pack already included with each boom).

ART 90 Q Cod. N728051 90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

SB Cod. D573003Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).

KIT LIGHT Cod. P120001 00001Lights on boom 3 - 4.5 m.Lights on boom 3 - 4.5 m.

KIT LIGHT1 Cod. P120001 00002Lights for booms over 4.5 m.Lights for booms over 4.5 m.

PCA N3 Cod. P120028 00001Top and bottom rubber cover profile for booms of 3 m max.Top and bottom rubber cover profile for booms of 3 m max.

PCA N4 Cod. P120028 00002Top and bottom rubber cover profile for booms of 4 m max.Top and bottom rubber cover profile for booms of 4 m max.

PCA N5 Cod. P120028 00003Top and bottom rubber cover profile for booms of 5 m max.Top and bottom rubber cover profile for booms of 5 m max.

PCA N6 Cod. P120028 00004Top and bottom rubber cover profile for booms of 6 m max.Top and bottom rubber cover profile for booms of 6 m max.

FAF 2R Cod. P125025

ZFAF2 Cod. P120026Additional anchor plates for cementing FAF2 forks to ground.Additional anchor plates for cementing FAF2 forks to ground.

GAM Cod. D940007Mobile rest leg for BGV barrier boom (not usable on BGV 30).Mobile rest leg for BGV barrier boom (not usable on BGV 30).

GA AQ AT Cod. D940008Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.

GAMA AQ AT Cod. D940009Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.

BIR C Cod. N190104Rubber safety edge (H 30 mm), price per m.Rubber safety edge (H 30 mm), price per m.

VENTIMIGLIA NS Cod. P111401 00001Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).

THERMO Cod. P120018Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C.Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C.

SCS 1 Cod. P111376Serial board for connection to zone and opposing leaves for control units with display While stocks last.Serial board for connection to zone and opposing leaves for control units with display While stocks last.

RME 2 Cod. P111001 00003230 V dual channel metal object detector with installation base.230 V dual channel metal object detector with installation base.

SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.