Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT KIT A400 FRA

Product code R925265 00002
  • DIMENSIONAL DIAGRAM
technical design DEIMOS ULTRA BT A

Complete kit 24 V for sliding gates weighing up to 400 kg. Leaf speed 12 m/min.

PLUS
  • Magnetic limit switches: this type of limit switch ensures safe and precise installations in any ambient condition

  • Control unit with programming display: the Merak control unit with programming display with pre-programmed scenarios helps the installer in the programming phase; the control unit is arranged in an oblique way, to facilitate reading and making the settings.

  • Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.

  • Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
List of products contained in the kit

DEIMOS ULTRA BT A400

Operator 24 V for sliding gates up to 400 kg in weight. Leaf speed 12 m/min.

Open

MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

Open

DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Open

RADIUS B LTA 24 R1

Flashing light with incorporated antenna for motors with power supply 24 V.

Open
Technical Data
Type of limit switch Magnetic
Impact reaction D-track
Slowdown Yes
U-Link Yes
Control unit Merak sl1
Board power supply 230 v
Power input 50 w
Locking Mechanical
Release Lever-operated with personal key
Frequency of use Intensive
Protection rating Ip44
Environmental conditions -20 ÷ 55 °c
Max. door/gate weight 400 kg
Supply voltage AC 24 v
Pinion module 4
Gate speed 12 m/min
Accessories

Recommended accessories.

  • CVZ Cod. D571053 steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.
    steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.

  • SL BAT2 Cod. P125035 Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A. Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

  • CVZ-S Cod. N999320 steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.
    steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.

  • B EBA RS 485 LINK Cod. P111468 Expansion board for connection of central units with serial controls management. Expansion board for connection of central units with serial controls management.

  • SFD Cod. N999151 Base plate for DEIMOS series (supplied with operator). Base plate for DEIMOS series (supplied with operator).

  • CP Cod. D221073 plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.
    plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.