DEIMOS BT KIT A600 FRA

Product code R925271 00002

Complete kit 24 V for sliding gates weighing up to 600 kg. Leaf speed 12 m/min.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

technical design
Control unit HAMAL
Board power supply 230 V
Supply voltage 24 V
Power consumption 70 W
Max. door/gate weight 600 kg
Gate panel speed 12 m/min
Type of limit switch Electromechanical
Pinion module 4
Slowdown Yes
Locking Mechanical
Release Lever-operated with personal key
Impact reaction D-Track
Frequency of use intensive
Protection rating IP24
Environmental conditions -20 ÷ 55 °C
Interconnectivity no
Warning lights for gates, 24volt or 230 volt
RADIUS B LTA 24 R1

Flashing light with incorporated antenna for motors with power supply 24 V.

Automatic gates photocells
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

Motors and complete automation kits for sliding gates up to 600 kg
DEIMOS BT A600

Operator 24 V for sliding gates up to 600 kg in weight. Leaf speed 12 m/min.

RADIUS LED BT A R1
Cod. D114093 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

RADIUS LED BT A R1 W
Cod. D114168 00003

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

RADIUS LED BT A R0
Cod. D114094 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

CP
Cod. D221073

plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

CVZ
Cod. D571053

steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

CVZ-S
Cod. N999320

steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

SFD
Cod. N999151

Base plate for DEIMOS series (supplied with operator)

SL BAT2
Cod. P125035

Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

Sliding Gates
Sliding gates automation systems
Download

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.