PHOBOS AC A50 120V

Product code P935097 00001

Irreversible electromechanical operator 120 V for swing gates weighing up to 500 kg and 5 m long.

Technologies

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Interconnectivity no
Cycle time 18 s
Type of limit switch work time
Control unit ALENA SW2
Slowdown Yes
Board power supply 230 V
Locking Mechanical
Motor voltage 120 V
Release Personal key
Power consumption 210 W
Impact reaction Electronic clutch
Max. width of door/gate wing 5 m
Frequency of use Semi intensive
Max. weight of door/gate wing 500 kg
Protection rating IPX4
Useful rod stroke 460 mm
Environmental conditions -20 ÷ 55 °C
Maximum angle 129 °
ALENA SW2
D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

ALENA SW2 120V
D113811 00003

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Board power supply: 120V single-phase Operator power supply: 230 V single-phase, max. 400W per operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors...

ALTAIR P
D113703 00002

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 300W per operator Main features: removable terminal blocks, programming with display and built-in dual channel receiver Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for...

ARB PHOBOS 25
N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

Swinging gates
Electromechanical automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show
Phobos AC A
How to Choose the Right Swing Gate Operator
Show

An unexpected error occurred: please reload the page or try again later.