Recommended accessories.
WIND RMC 235B 240-230 EF
Product code P910039 00002- DIMENSIONAL DIAGRAM
Operator for shutters with spring holder pulley diam. 101 mm. Max. torque 235 nm and absorbed power 600 W. Release with steel cable and knob for electric brake.
PLUS
-
Simple and intuitive adjustment of limit switches
-
Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack
Assistance
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Technical documentation
Technical Data
| Impact reaction | No |
| U-Link | No |
| Control unit | Elba/elba bu |
| Power input | 600 w |
| Locking | Electric brake |
| Protection rating | Ip20 |
| Environmental conditions | -10 ÷ 50 °c |
| Power supply | 230 v |
| Shaft diameter | 101 mm |
| Spring holder diameter | 240 mm |
| Maximum torque | 235 nm |
| Rotation speed | 8 rpm |
Imperial measurements
The data shown are for information purposes only.
| Impact reaction | No |
| Control unit | Elba/elba bu |
| Power input | 600 w |
| Locking | Electric brake |
| Protection rating | Ip20 |
| Environmental conditions | 14 ÷ 122 °f |
| Power supply | 230 v |
| Shaft diameter | 3.9763801 inch |
| Spring holder diameter | 9.448824 inch |
| Maximum torque | 235 nm |
| Rotation speed | 8 rpm |
Accessories
-
BOX Cod. N574039 Wall safe for unlocking with steel cable and electrical control; cable not included. Wall safe for unlocking with steel cable and electrical control; cable not included.
-
CMS Cod. D831081 Sign. Sign.
-
ELBA Cod. D113716 00002 ELBA control panel. ELBA control panel.
-
X EF1 Cod. N999510 Electric brake for Wind Rmc and Rmb 230V. Electric brake for Wind Rmc and Rmb 230V.
-
SHEDIR B CBC 02 L01 Cod. P111515 Control unit for wired centralisation. For 2 operators (or 2 groups of operators). Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
