Irreversible electromechanical operator 120 V for swing gates weighing up to 500 kg and 5 m long.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
|Cycle time||18 s|
|Type of limit switch||work time|
|Control unit||ALENA SW2|
|Board power supply||230 V|
|Motor voltage||120 V|
|Power consumption||210 W|
|Impact reaction||Electronic clutch|
|Max. width of door/gate wing||5 m|
|Frequency of use||Semi intensive|
|Max. weight of door/gate wing||500 kg|
|Useful rod stroke||460 mm|
|Environmental conditions||-20 ÷ 55 °C|
|Maximum angle||129 °|
Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...
ALENA SW2 120V
Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors...
Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for...