MAXIMA ULTRA 35 SM
Product code P940073 00002230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version without spring. Colour RAL 7015.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerA single communication platform for all types of control units and receivers. The innovative interconnectivity systems developed by Bft along with wireless connection solutions in the field of access point automation become integrated through the new U-link system communication protocol. A technology designed and developed to operate using specific gateways for any type of physical media and communication protocol. To fully facilitate installers in creating the system and in maintenance, Bft can offer solutions based on Bluetooth transmission systems in local and TCP/IP environments for remote connection. U-Link ensures an absolutely stable standard, correct communication, as well as secure data protection thanks to two levels of encryption, offered by the data encryption system and password of the protocol and by the underlying communication system. - U-Link is a technological platform that forms the heart of Bft products - U-link uses an open approach: by changing the B-Eba, Bft proprietary gateway, it is possible to adapt to many different communication languages - U-link is flexible: it can work with or without a network connection, depending on the B-Eba gateway installed - U-Link enables remote maintenance of the products thanks to two-way communication - U-link is scalable: an infinite number of objects can be added to a U-link network - U-Link allows the creation of groups of products: various B-Ebas can be grouped to allow individual or group control of the associated products U-link is an innovation that turns products into Bft solutions.
For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
Motor rotation constantly under control The inverter is an electronic device allowing motor rotation speed to be controlled at any moment, ensuring safety and reliability of the installation, and even extending its life. This is because the inverter reduces the stresses on mechanical parts, subjecting them to less stress. The system also allows management of automation opening and closing times.
Allows precise control and management of bar/boom speed in a specific range of Bft barriers and also provides excellent dynamic performance in acceleration and slowdown, ensuring extreme quietness.
The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.
Together with irreversibility of the reduction unit, this device included in a specific range Bft barriers provides intrinsic anti-vandal protection, preventing unauthorised opening of the gate.
This device, included in a specific range of Bft barriers, allows the motor to be maintenance-free and offers extreme reliability and quietness. It can also be used in hazardous areas, as it does not produce sparks.
A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

Control unit | CSB-XT |
Motor power supply | 230 V |
Power consumption | 300 W |
Motor type | Three-phase asynchronous |
Gear unit type | In oil bath |
Inverter | Yes |
Slowdown | Yes |
Locking | Mechanical |
Release | Inside the structure |
Impact reaction | encoder |
Frequency of use | Continuous |
MCBF (Mean Cycles Between Failures) | 5000000 Op |
Protection rating | IP54 |
Environmental conditions | -30 ÷ 60 °C |
Interconnectivity | Yes |
Clear opening | from 1.7 to 5 ft |

KIT ATM LIGHT 3 R/G 2W
Cod. P120077 00001
Red-green LED lights kit for fitting on ATM bars up to 3m.

KIT ATM LIGHT 5 R/G 2W
Cod. P120077 00002
Red-green LED lights kit for fitting on ATM bars up to 5m.

MLR2.5
Cod. P120056
Red spring - MAXIMA Utra 35 Ref. spring table

MLB3
Cod. P120057
Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5
Cod. P120058
Green spring - MAXIMA Ultra 35 Ref. spring table

ATM25
Cod. P120102 00001
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ADJ-FOOT
Cod. P120093
Suspended cushioned telescopic supporting foot for BOOM PS booms.

OMEGA ATM U35
Cod. P120062 00001
Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

OMEGA ATM FRA U35
Cod. P120071
Single clamping for ATM bar for Maxima Ultra 35

PCA ATM 3
Cod. P120053 00001
Rubber protection (red) for fitting on bar L = 3 m max.

PCA ATM 5
Cod. P120053 00002
Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 8
Cod. P120053 00003
Protection rubber (black) for fitting on bars from L = 6÷8 m.

ALLU 2 MAXIMA ULTRA
Cod. P120075
Power supply for ATM LIGHT Kit on Maxima Ultra

TP MAXIMA ULTRA
Cod. P120076
Thermal probe for Maxima Ultra barriers

EBB KIT ATML
Cod. P120079
Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
Cod. P120080
Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

GA ATM
Cod. P120050
Adjustable suspended foot, powder coated cataphoresis treated.

RST ATM
Cod. P120049
Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

SRV DIN
Cod. P120032
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

FCS MAXIMA 5
Cod. P120033
2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

ATM25
Cod. P120111 00001
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
Cod. P120102 00002
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
Cod. P120102 00003
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
Cod. P120102 00004
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...