Accessories

KIT ATM LIGHT 8 R/G 2W Cod. P120077 00003Red-green LED lights kit for fitting on ATML bars up to 8 m.Red-green LED lights kit for fitting on ATML bars up to 8 m.

KIT ATM LIGHT 5 R/G 2W Cod. P120077 00002Red-green LED lights kit for fitting on ATM bars up to 5m.Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATM LIGHT 3 R/G 2W Cod. P120077 00001Red-green LED lights kit for fitting on ATM bars up to 3m.Red-green LED lights kit for fitting on ATM bars up to 3m.

PRV-CHN 16 Cod. P800078Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.

PCA N8 Cod. P120028 00005Top and bottom rubber cover profile for booms of 8 m max.Top and bottom rubber cover profile for booms of 8 m max.

ACTR Cod. N999608Pack of 12 additional reflective labels (1 pack already included with each boom).Pack of 12 additional reflective labels (1 pack already included with each boom).

PCA N5 Cod. P120028 00003Top and bottom rubber cover profile for booms of 5 m max.Top and bottom rubber cover profile for booms of 5 m max.

PCA N4 Cod. P120028 00002Top and bottom rubber cover profile for booms of 4 m max.Top and bottom rubber cover profile for booms of 4 m max.

ART 90 Q Cod. N728051 90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

PCA N6 Cod. P120028 00004Top and bottom rubber cover profile for booms of 6 m max.Top and bottom rubber cover profile for booms of 6 m max.

OMEGA AT 70 Cod. N999607Accessories pack for AT 704/706.Accessories pack for AT 704/706.

OMEGA AQ 6 Cod. N999606Accessories pack for AQ 6 boom.Accessories pack for AQ 6 boom.

PRV-CHN 10 Cod. P800077Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.

CHN-DRIVE 2 Cod. P800079Pavement guide (2 metres) for housing chain.Pavement guide (2 metres) for housing chain.

OMEGA ATM U35 Cod. P120062Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

ZFAF2 Cod. P120026Additional anchor plates for cementing FAF2 forks to ground.Additional anchor plates for cementing FAF2 forks to ground.

PCA N3 Cod. P120028 00001Top and bottom rubber cover profile for booms of 3 m max.Top and bottom rubber cover profile for booms of 3 m max.

OMEGA ATM FRA U35 Cod. P120071Single clamping for ATM bar for Maxima Ultra 35.Single clamping for ATM bar for Maxima Ultra 35.

TWIN CHN PADLOCK Cod. P800107Reinforced chain padlock for TWIN / TWIN LIGHT.Reinforced chain padlock for TWIN / TWIN LIGHT.

PCA ATM 8 Cod. P120053 00003Protection rubber (black) for fitting on bars from L = 6÷8 m.Protection rubber (black) for fitting on bars from L = 6÷8 m.

MLR2.5 Cod. P120056Red spring - MAXIMA Utra 35 Ref. spring table.Red spring - MAXIMA Utra 35 Ref. spring table.

MLB3 Cod. P120057Blue spring - MAXIMA Ultra 35 Ref. spring table.Blue spring - MAXIMA Ultra 35 Ref. spring table.

MLV5 Cod. P120058Green spring - MAXIMA Ultra 35 Ref. spring table.Green spring - MAXIMA Ultra 35 Ref. spring table.

OMEGA ATML Cod. P120044Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.

MLC9 Cod. P120060Yellow spring - Maxima Ultra 68. Ref. spring table.Yellow spring - Maxima Ultra 68. Ref. spring table.

MLC7.5 Cod. P120059White spring - MAXIMA Ultra 68. Ref. spring table.White spring - MAXIMA Ultra 68. Ref. spring table.

ATML60 Cod. P120041Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.Aluminium bar L = 6 m Ø92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

OMEGA FRC ATML Cod. P120045New fork clamping for ATML bar on barrier model. MAXIMA 60/80. Bar not included.New fork clamping for ATML bar on barrier model. MAXIMA 60/80. Bar not included.

RST ATM Cod. P120049Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

GA ATM Cod. P120050Adjustable suspended foot, powder coated cataphoresis treated.Adjustable suspended foot, powder coated cataphoresis treated.

PCA ATM 5 Cod. P120053 00002Rubber protection (red) for fitting on bar L = 5 m max.Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 3 Cod. P120053 00001Rubber protection (red) for fitting on bar L = 3 m max.Rubber protection (red) for fitting on bar L = 3 m max.

KIT ATM LIGHT 5 R/G Cod. P120052 00002Red-green LED lights kit for fitting on ATM bars up to 5 m.Red-green LED lights kit for fitting on ATM bars up to 5 m.

KIT ATML LIGHT 8 R/G Cod. P120052 00003Red-green LED lights kit for fitting on ATM bars up to 8 m.Red-green LED lights kit for fitting on ATM bars up to 8 m.

KIT ATM LIGHT 3 R/G Cod. P120052 00001Red-green LED lights kit for fitting on ATM bars up to 3 m.Red-green LED lights kit for fitting on ATM bars up to 3 m.

OMEGA ATM FRA Cod. P120048Fracture system clamping for bar ATM.Fracture system clamping for bar ATM.

OMEGA FRC ATML U Cod. P120047Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.Fork clamping for ATML bar on barrier model. MAXIMA 68 ULTRA. Bar not included.

OMEGA ATML U Cod. P120046Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.Single clamping, hand guard and screws for ATML bar on MAXIMA 68 ULTRA. Bar not included.

IS ATML Cod. P120078Internal reinforcement for ATML rods.Internal reinforcement for ATML rods.

EBB KIT ATML Cod. P120079Adjustable suspended foot, powder coated cataphoresis treated.Adjustable suspended foot, powder coated cataphoresis treated.

FAF UNI R Cod. P120080Adjustable suspended foot, powder coated cataphoresis treated.Adjustable suspended foot, powder coated cataphoresis treated.

MLC11 Cod. P120081Violet spring - Maxima Ultra 68. Ref. spring table.Violet spring - Maxima Ultra 68. Ref. spring table.

CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
Max. load capacity 800 kg.

CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
Max. load capacity 1000 kg.

CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
Max. load capacity 600 kg.

CFZ Cod. D571054galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
Max. load capacity 2000 kg.galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding.
Max. load capacity 2000 kg.

CFZ6 Cod. D571491galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding.
Max. load capacity 4000 kg.galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding.
Max. load capacity 4000 kg.

BIN120 CATENA 2900 Cod. P115010 00001Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm.Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm.

BIN120 CATENA 3500 Cod. P115010 00002Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm.Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm.

BIN B GDA 3020 CAT Cod. P115015 00001Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm.Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm.

BIN B GDA 3620 CAT Cod. P115015 00002Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm.Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm.

BIN B Gda 2x1510 Cat Cod. P115015 00003Chain track divided into two halves for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm.Chain track divided into two halves for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm.

BIN B Gda 2x1810 Cat Cod. P115015 00004Chain track divided into two halves for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm.Chain track divided into two halves for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm.

BIN CATENA 2900 SINT Cod. P115020 00001Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.

BIN CATENA 3500 SINT Cod. P115020 00002Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.

BIN CATENA 2X1750 SINT Cod. P115021 00002Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.

BIN120 CATENA 2X 1750 Cod. P115010 00004Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.

BIN120 CATENA 2X 1450 Cod. P115010 00003Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.

BIN BELT 2X1450 Pig FE50 Cod. P115023 00001Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length # {td-7563-80-3}, travel 2400 mm.Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length # {td-7563-80-3}, travel 2400 mm.

BIN B GDA 2x1810 BELT Cod. P115026 00004Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm.Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm.

BIN CINGHIA 2900 PIG FE Cod. P115022 00001Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.

BIN CINGHIA 3500 PIG FE Cod. P115022 00002Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.

BIN CINGHIA 2X1750 Pig FE Cod. P115023 00002Belt rail divided into two halves for BOTTICELLI, length 3500 mm, travel 3000 mm.Belt rail divided into two halves for BOTTICELLI, length 3500 mm, travel 3000 mm.

BIN B GDA 3620 BELT Cod. P115026 00002Monoblock belt rail, length 3620 mm, useful length 3160 mm.Monoblock belt rail, length 3620 mm, useful length 3160 mm.

BIN B GDA 3020 BELT Cod. P115026 00001Monoblock belt rail, length 3020 mm, useful length 2560 mm.Monoblock belt rail, length 3020 mm, useful length 2560 mm.

BIN B GDA 2x1510 BELT Cod. P115026 00003Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm.Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm.

CABLE LX BT Cod. N9994171603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m.1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m.

CABLE N Cod. N999405Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75.Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75.

CABLE N BT Cod. N999404Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

ECOSOL CABLE Cod. N99947620 m extension for ECOSOL CHARGER.20 m extension for ECOSOL CHARGER.

PEGASO CABLE MONO Cod. D121631Pre-wired power supply cable for PEGASO single phase operators. Length 1 m.Pre-wired power supply cable for PEGASO single phase operators. Length 1 m.

PEGASO CABLE TRI Cod. D121632Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m.Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m.

PEGASO UP CONTROL 5 Cod. D121624Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m.Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m.

PEGASO UP CONTROL 10 Cod. D121625Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m.Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m.

PEGASO CABLE ENC 5 Cod. D121674Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m.Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5 m.

PEGASO CABLE ENC 10 Cod. D121675Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m.Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10 m.

PEGASO CABLE AUTO 5N Cod. D121679Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m.Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 5 m.

PEGASO CABLE AUTO 10N Cod. D121680Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m.Pre-wired connection cable between PEG INT and external control unit electric power supply. Length 10 m.

BOLLARD CABLE EXT25 Cod. P800114Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards).Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards).

BOLLARD CABLE EXT50 Cod. P800115Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards).Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards).

PLE Cod. D730178Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.

PL LX BT Cod. N999443Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A.Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A.

ARB LUX G Cod. N733474Adjustable front and rear bracket for LUX G operator.Adjustable front and rear bracket for LUX G operator.

ARB LUX Cod. N733426Adjustable front and rear bracket for LUX operator.Adjustable front and rear bracket for LUX operator.

ARB PHOBOS N L Cod. N733428Front and rear adjustable bracket for PHOBOS operator.Front and rear adjustable bracket for PHOBOS operator.

ARB PHOBOS N Cod. N733427Front and rear adjustable bracket for PHOBOS operator.Front and rear adjustable bracket for PHOBOS operator.

ARB ORO Cod. N733424Adjustable front and rear brackets for ORO operator.Adjustable front and rear brackets for ORO operator.

APT Cod. N999060Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling.Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling.

ECOSOL POST BR Cod. N999473Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm.Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm.

ECOSOL SECURITY Cod. N999475Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR.Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR.

TPF Cod. P800040Foundation and anchor plate for totem.Foundation and anchor plate for totem.

SBV Cod. P111445Anodised aluminium supporting crosspiece for VISTA SL.Anodised aluminium supporting crosspiece for VISTA SL.

PPR Cod. P111156Door guide slide for automatic doors with aluminium frame.Door guide slide for automatic doors with aluminium frame.

PGI Cod. P111158Bottom door guide for automatic doors with aluminium frame.Bottom door guide for automatic doors with aluminium frame.

PEGASO ADA Cod. N733449PEGASO ADA adapter for installation on doors with 1"1/4 shaft.PEGASO ADA adapter for installation on doors with 1"1/4 shaft.

PEG CCP Cod. N999468Extension for PEGASO C operators release chain. Length 4 m.Extension for PEGASO C operators release chain. Length 4 m.

SFZ Cod. N733121Additional fixing bracket kit. To be used on chain drive installations.Additional fixing bracket kit. To be used on chain drive installations.

SFD Cod. N999151Base plate for DEIMOS series (supplied with operator).Base plate for DEIMOS series (supplied with operator).

SFI Cod. N999156Base plate for ARES and ICARO (supplied with operator).Base plate for ARES and ICARO (supplied with operator).

SFSP Cod. P125015Adjustable anchor base for SP3500, supplied separately.Adjustable anchor base for SP3500, supplied separately.

SP3500 SAFETY Cod. P125016Safety microswitch for SP3500.Safety microswitch for SP3500.

SLV SBV C1 Cod. N733527Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece.Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece.

SLV SBV C2 Cod. N733526Brackets for side mounting of the SBV C aluminium supporting crosspiece.Brackets for side mounting of the SBV C aluminium supporting crosspiece.

SAS2 KIT B GDA 260 B01 Cod. N999621Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm.Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm.

SAS1 KIT B GDA 260 B01 Cod. N999620Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm.Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm.

SBV TL Cod. P111640 00001Vista TL support beam, length 6.82 m.Vista TL support beam, length 6.82 m.

SLV SBV TL1 Cod. N733564 SBV TL ceiling fixing brackets.SBV TL ceiling fixing brackets.

SLV SBV TL2 Cod. N733565 SBV TL side fixing brackets.SBV TL side fixing brackets.

ARB KUSTOS FRONT Cod. N733646Front adjustable fixing brackets for Kustos BT A.Front adjustable fixing brackets for Kustos BT A.

ARB KUSTOS REAR Cod. N733647Pair of adjustable rear fixing brackets for Kustos BT A.Pair of adjustable rear fixing brackets for Kustos BT A.

SFR A Cod. N733722Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.

SFR L A Cod. N733723Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.

PLE ATHOS Cod. N999724Anchor plate for welding the mountings to masonry pillars for ATHOS operators.Anchor plate for welding the mountings to masonry pillars for ATHOS operators.

LRV Cod. P135005Short articulated arms for IGEA and IGEA BT.Short articulated arms for IGEA and IGEA BT.

NAT Cod. N999131Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath.

FCS SX Cod. N733066 00004Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

CPS SX Cod. N733066 00002Foundation box designed for fitting the SUB left-hand operator.Foundation box designed for fitting the SUB left-hand operator.

CPS G Cod. N733092Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.

FCS DX Cod. N733066 00003Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.

CPS DX Cod. N733066 00001Foundation box designed for fitting the SUB right-hand operator.Foundation box designed for fitting the SUB right-hand operator.

BTCF 120 E INOX Cod. N733398Stainless steel foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not provided.Stainless steel foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not provided.

BTCF 120 E Cod. N733397Foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not supplied.Foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not supplied.

FCS BT Cod. N733480 00001Foundation box for SUB BT series operators.Foundation box for SUB BT series operators.

FLANGE RANCH C Cod. P800109Flange for Ranch C.Flange for Ranch C.

FLANGE RANCH D Cod. P800110Flange for Ranch E.Flange for Ranch E.

FLANGE RANCH E Cod. P800119Flange for Ranch E.Flange for Ranch E.

BSC Cod. N728002Arm for installation of SUB out of the gate axis.Arm for installation of SUB out of the gate axis.

BS E5 Cod. N728011Slide lever for E5 N. Max leaf length 1.6 m, max leaf weight 100 kg.Slide lever for E5 N. Max leaf length 1.6 m, max leaf weight 100 kg.

BL E5 Cod. N733008Long articulated arm for E5, max leaf length 2 m, max leaf weight 200 kg.Long articulated arm for E5, max leaf length 2 m, max leaf weight 200 kg.

E180 Cod. N733304Accessory for opening to 180 ° for ELI 250, ELI 250 V operator.Accessory for opening to 180 ° for ELI 250, ELI 250 V operator.

PBE Cod. N733391Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

CBA Cod. N733112Straight telescopic arms for the installation of PHEBE series operators on overhead door.Straight telescopic arms for the installation of PHEBE series operators on overhead door.

CBAC Cod. N733114Curved telescopic arms for the installation of PHEBE series operators on overhead door.Curved telescopic arms for the installation of PHEBE series operators on overhead door.

CBAS Cod. N733119Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.

CBASL Cod. N733113Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.

ASW XL RIG Cod. P111565Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm.Vista SW XL rigid pull arm. Jamb max dimens.: 100 mm.

ASW XL ART Cod. P111566Vista SW XL articulated push arm. Max jamb dimens.: 150 mm.Vista SW XL articulated push arm. Max jamb dimens.: 150 mm.

ASW XL ARTL Cod. P111567Vista SW XL long articulated push arm. Jamb dimens. 150 mm.Vista SW XL long articulated push arm. Jamb dimens. 150 mm.

EXT ASW XL 30 Cod. P111563 00001Arm connection L=30 mm Vista SW XL, spacer.Arm connection L=30 mm Vista SW XL, spacer.

EXT ASW XL 50 Cod. P111563 00002Arm connection L=50 mm Vista SW XL, spacer.Arm connection L=50 mm Vista SW XL, spacer.

EXT ASW XL 70 Cod. P111563 00003Arm connection L=70 mm Vista SW XL, spacer.Arm connection L=70 mm Vista SW XL, spacer.

EXT ASW XL 90 Cod. P111563 00004Arm connection L=90 mm Vista SW XL, spacer.Arm connection L=90 mm Vista SW XL, spacer.

BRTS Cod. P115029Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U...
Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U operators.

TA BIN Cod. N999370Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs).Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs).

BCP Cod. D412377Short welding base for PHEBE series operators (L 578 mm).Short welding base for PHEBE series operators (L 578 mm).

BLP Cod. N733288Long welding base for PHEBE series operators (L 1600 mm).Long welding base for PHEBE series operators (L 1600 mm).

CTBP Cod. N733299Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.

CTA Cod. N7331202 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.

CTA2 Cod. N7331292 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.

SM504 Cod. P130015Support with bearing for octagonal roller - screw type.Support with bearing for octagonal roller - screw type.

SM505 Cod. P130014Support for octagonal roller - cementing type.Support for octagonal roller - cementing type.

AD 5027 Cod. N999323Drive wheel and limit switch adapter for RUL60.Drive wheel and limit switch adapter for RUL60.

SM5013 Cod. N999324Wall-mounted orientable support for operators with manual release.Wall-mounted orientable support for operators with manual release.

SM5014 Cod. N999325Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

SM5015 Cod. N999326Wall-mounted two-position orientable support for operators with manual release.Wall-mounted two-position orientable support for operators with manual release.

AD5028 Cod. N999327Octagonal adapter Ø70 mm zamak.Octagonal adapter Ø70 mm zamak.

AD5029 Cod. N999348Round adapter Ø63x1.5 mm.Round adapter Ø63x1.5 mm.

AD5030 Cod. N999349Deprat LP62 adapter.Deprat LP62 adapter.

AD5031 Cod. N999350Deprat LP89 adapter.Deprat LP89 adapter.

AD5032 Cod. N999351ZF 64 adapter.ZF 64 adapter.

AD5034 Cod. N999395ZF 54 adapter.ZF 54 adapter.

AD5035 Cod. N999396Ogive adapter Ø78 mm.Ogive adapter Ø78 mm.

AD5036 Cod. N999397Octagonal adapter 60 PL.Octagonal adapter 60 PL.

AD5038 Cod. N999547Metallic ogive adapter Ø70 mm.Metallic ogive adapter Ø70 mm.

MM8 Cod. N999328Manual operation eye-ring.Manual operation eye-ring.

MM9 Cod. N99932945 ° universal joint for manual operation.45 ° universal joint for manual operation.

MM10 Cod. N99933090 ° universal joint for manual operation.90 ° universal joint for manual operation.

MM11 Cod. N9993311.5 m articulated boom with hook for manual operation.1.5 m articulated boom with hook for manual operation.

MM12 Cod. N9993321.5 m rigid boom with hook for manual operation.1.5 m rigid boom with hook for manual operation.

BLOCCANTI 40 Cod. P130001Anti-break-in block for shutters with slats of height 40 mm.Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50 Cod. P130013Anti-break-in block for shutters with slats of height 50 mm.Anti-break-in block for shutters with slats of height 50 mm.

SPAC Cod. P111678Pair of locks (2) for glass leaf.Pair of locks (2) for glass leaf.

RUL 60/1,5 Cod. P130010Octagonal shutter winding roller Ø60 mm x 1.5 m.Octagonal shutter winding roller Ø60 mm x 1.5 m.

RUL 60/3 Cod. P130012Octagonal shutter winding roller Ø60 mm x 3 m.Octagonal shutter winding roller Ø60 mm x 3 m.

RUL 60/6 Cod. P130008Octagonal shutter winding roller Ø60 mm x 6 m.Octagonal shutter winding roller Ø60 mm x 6 m.

CAL 60/100 Cod. P130002Adjustable telescopic octagonal cover for RUL 60.Adjustable telescopic octagonal cover for RUL 60.

CAL 60/30 Cod. P130004Octagonal cover for RUL 60.Octagonal cover for RUL 60.

CBO Cod. D730251Base plate for mod. MOOVI - GIOTTO.Base plate for mod. MOOVI - GIOTTO.

SB Cod. D573003Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).

AT 502 Cod. N728028Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504 Cod. N728027Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704 Cod. N728026Round boom ø 70 mm, length 4.3 m. for clear spaces up to 4 m ATT 704.Round boom ø 70 mm, length 4.3 m. for clear spaces up to 4 m ATT 704.

AT 706 Cod. N728030Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m.Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m.

AQ6 Cod. N728022Complete 6 m rectangular boom for MICHELANGELO.Complete 6 m rectangular boom for MICHELANGELO.

BM Cod. D730964adjustable base plate for mod. MICHELANGELO - BM.adjustable base plate for mod. MICHELANGELO - BM.

GAM Cod. D940007Mobile rest leg for BGV barrier boom (not usable on BGV 30).Mobile rest leg for BGV barrier boom (not usable on BGV 30).

OMEGA AQ S/STEEL Cod. N999509Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.

OMEGA AQ Cod. N999507Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.

OMEGA AT Cod. N999513Pack of accessories for installation of 3/5 m round boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/5 m round boom for MOOVI/GIOTTO.

AT3 Cod. N728031Complete 3 metre round boom for MOOVI/GIOTTO.Complete 3 metre round boom for MOOVI/GIOTTO.

AT5 Cod. N728032Complete 5 metre round boom for MOOVI/GIOTTO.Complete 5 metre round boom for MOOVI/GIOTTO.

AQ3 Cod. N728033Complete 3 metre rectangular boom for GIOTTO and MOOVI.Complete 3 metre rectangular boom for GIOTTO and MOOVI.

AQ5 Cod. N728034Complete 5 metre rectangular boom for GIOTTO and MOOVI.Complete 5 metre rectangular boom for GIOTTO and MOOVI.

AT6 Cod. N728038Complete 6 metre round boom for MOOVI/GIOTTO.Complete 6 metre round boom for MOOVI/GIOTTO.

FAF 2 Cod. P120023Rest fork for booms. For bolting to ground.Rest fork for booms. For bolting to ground.

ATML EXT2 Cod. P120042Extension L=2m for bar model ATML 60. Lights and rubber not included.Extension L=2m for bar model ATML 60. Lights and rubber not included.

ATM25 Cod. P120036 00001Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATM50 Cod. P120036 00004Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATM40 Cod. P120036 00003Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATM30 Cod. P120036 00002Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

GA AQ AT Cod. D940008Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.

GAMA AQ AT Cod. D940009Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.

THERMO Cod. P120018Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C.Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C.

PPA TL 1600 N Cod. P111663 00001Clamps for glass leaf, 1600 mm, natural.Clamps for glass leaf, 1600 mm, natural.

PPA TL 1600 O Cod. P111663 00002 Clamps for glass leaf, 1600 mm, anodised.Clamps for glass leaf, 1600 mm, anodised.

PPA TL 3200 N Cod. P111664 00001Clamps for glass leaf, 3200 mm, natural.Clamps for glass leaf, 3200 mm, natural.

PPA TL 3200 O Cod. P111664 00002Clamps for glass leaf, 3200 mm, anodised.Clamps for glass leaf, 3200 mm, anodised.

PPA TL FX Cod. P111688Vista TL glass leaf fixing clamp.Vista TL glass leaf fixing clamp.

PPA TL GD Cod. P111689Floor guides for Vista TL glass leaves.Floor guides for Vista TL glass leaves.

BIR C Cod. N190104Rubber safety edge (H 30 mm), price per m.Rubber safety edge (H 30 mm), price per m.

CM1700 Cod. P111052Mechanical safety edge, length 1.7 m.Mechanical safety edge, length 1.7 m.

CM2000 Cod. P111053Mechanical safety edge, length 2 m.Mechanical safety edge, length 2 m.

BAR C BA 2 Cod. P111451 00002Double profile safety edge with lip seals (L2000xh60 mm.) BAR C BA 2.Double profile safety edge with lip seals (L2000xh60 mm.) BAR C BA 2.

TOTEM UNIT Cod. P800116Base module for TOTEM, can be used for both lower and upper units.Base module for TOTEM, can be used for both lower and upper units.

TCAP Cod. P800108Top covering without lights for elements of Totem.Top covering without lights for elements of Totem.

ERV Cod. N733408Solenoid lock assembly for VISTA SL/SL C, (use with BBV recommended) ERV.Solenoid lock assembly for VISTA SL/SL C, (use with BBV recommended) ERV.

X EF1 Cod. N999510Electric brake for Wind Rmc and Rmb 230V.Electric brake for Wind Rmc and Rmb 230V.

SASAM 1 Cod. P111163 00002Antipanic breakthrough system in anodised aluminium, 1 leaf. Length mx 1100 mm.Antipanic breakthrough system in anodised aluminium, 1 leaf. Length mx 1100 mm.

SASAM 2 Cod. P111263 00002Antipanic breakthrough system in anodised aluminium, 2 leaves. Length mx 1100 mm.Antipanic breakthrough system in anodised aluminium, 2 leaves. Length mx 1100 mm.

SASA 1AM SIST SFOND.1 ANTA MOBILE Cod. P111720 00002Breakthrough system kit for 1 movable leaf.Breakthrough system kit for 1 movable leaf.

SASA 1AMF SIST SFOND.ANTE 1 MOB + 1 FX Cod. P111721 00002Breakthrough system kit for 1 fixed leaf and 1 movable leaf.Breakthrough system kit for 1 fixed leaf and 1 movable leaf.

SASA 2AM SIST SFOND_.2 ANTE MOB Cod. P111722 00002Breakthrough system kit for 2 movable leaves.Breakthrough system kit for 2 movable leaves.

SASA 2AMF SIST SFOND.ANTE 2 MOB + 2 FX Cod. P111723 00002Breakthrough system kit for 2 fixed leaves and 2 movable leaves.Breakthrough system kit for 2 fixed leaves and 2 movable leaves.

SASA BRACKETS FOR LEAF BREAKAGE DETECTION PHOTOC. Cod. P111724 00002Bracket kit for mounting FPA1 photocells for leaf breakage detection.Bracket kit for mounting FPA1 photocells for leaf breakage detection.

SASA PRA 2,5 PROF.PROT.ANTA FX/MOB 2.5M Cod. P111725 00002Protection profile for fixed/movable leaf. Length L = 2.5 m.Protection profile for fixed/movable leaf. Length L = 2.5 m.

SASA PRA 5 PROF. PROTEZ.ANTA FX/MOB, 5M Cod. P111726 00002Protection profile for fixed/movable leaf. Length L = 5 m.Protection profile for fixed/movable leaf. Length L = 5 m.

PRV 40.08O CORNICE ABBATTIMENTO L=6.82 Cod. P111607 00002Break-open frame for fixed leaf joint. Length L = 6.82 m.Break-open frame for fixed leaf joint. Length L = 6.82 m.

PRV 40.12O MONTANTE ABBATTIMENTO L=5.1 Cod. P111610 00002Break-open upright for fixed leaf joint. Length L = 5.1 m.Break-open upright for fixed leaf joint. Length L = 5.1 m.

PRV 40.A53 CERNIERE PER SASA DX Cod. N733589Right hinge for joint on fixed leaf.Right hinge for joint on fixed leaf.

PRV 40.A54 CERNIERE PER SASA SX Cod. N733590Left hinge for joint on fixed leaf.Left hinge for joint on fixed leaf.

PIG 12/ULISSE S Cod. N733338Z12 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.Z12 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

PIG 14/ULISSE S Cod. N733336Z14 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.Z14 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

PIG 18/ULISSE S Cod. N733339Z18 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.Z18 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

PIG 30/ULISSE S Cod. N733337Z30 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.Z30 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

COR 30 Cod. N733148Z30 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.Z30 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.

COR 40 Cod. N733149Z40 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.Z40 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.

HIDE HINGE INF Cod. N999524Bottom fixed hinge for the installation of HIDE SW series operator.Bottom fixed hinge for the installation of HIDE SW series operator.

HIDE HINGE SUP Cod. N999526Top hinge for the installation of HIDE SW series operator.Top hinge for the installation of HIDE SW series operator.

SIGN WITH TRAFFIC LIGHT ENG Cod. D113708

Magnetic loop detector Cod. D110945Pre-wired magnetic pre-cabled coil 6 m in length.Pre-wired magnetic pre-cabled coil 6 m in length.

VISTA SEL Cod. D113722Function selector for pedestrian door series VISTA SL, SL C, TL.Function selector for pedestrian door series VISTA SL, SL C, TL.

VISTA SEL SW Cod. D113789Function selector Vista SW.Function selector Vista SW.

VIO-M Cod. P111662Compact mono-directional activation sensor.Compact mono-directional activation sensor.

VIO-DT2 Cod. P111653Safety and bi-directional activation sensor, dual technology, monitored.Safety and bi-directional activation sensor, dual technology, monitored.

VIO-DT1 Cod. P111654Safety and mono-directional activation sensor, dual technology, monitored.Safety and mono-directional activation sensor, dual technology, monitored.

IXIO-DT1 Cod. P111655Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.

VIO-ST Cod. P111656Infrared safety sensor, monitored.Infrared safety sensor, monitored.

4SAFE IR SAFETY SENSOR MONIT.SW/1MOD/700 Cod. P111657 00001Monitored IR safety sensor for side-hung leaves, 1 module, 700 mm.Monitored IR safety sensor for side-hung leaves, 1 module, 700 mm.

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/700 Cod. P111657 00002Monitored IR safety sensor for side-hung leaves, 2 modules, 700 mm.Monitored IR safety sensor for side-hung leaves, 2 modules, 700 mm.

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/900 Cod. P111657 00003Monitored IR safety sensor for side-hung leaves, 2 modules, 900 mm.Monitored IR safety sensor for side-hung leaves, 2 modules, 900 mm.

OA-AXIS T Cod. P111753Active infrared sensor for activation and security with safety test.Active infrared sensor for activation and security with safety test.

OA-AXIS II Cod. P111751Active infrared sensor for activation and security.Active infrared sensor for activation and security.

OA-203C Cod. P111754Active infrared sensor for activation and presence.Active infrared sensor for activation and presence.

OA-PRESENCE TN Cod. P111755Active infrared sensor for security.Active infrared sensor for security.

OA-EDGE T 340 1M Cod. P111756Active infrared sensor for security L 340 mm with 1 module with safety test.Active infrared sensor for security L 340 mm with 1 module with safety test.

OA-EDGE T 700 1M Cod. P111757Active infrared sensor for security L 700 mm with 1 module with safety test.Active infrared sensor for security L 700 mm with 1 module with safety test.

OA-EDGE T 1200 2M Cod. P111758Active infrared sensor for security L 1200 mm with 2 modules with safety test.Active infrared sensor for security L 1200 mm with 2 modules with safety test.

OT 3 Cod. P111759Elbow-operated pushbutton, silver.Elbow-operated pushbutton, silver.

TP MAXIMA ULTRA Cod. P120076Thermal probe for Maxima Ultra barriers.Thermal probe for Maxima Ultra barriers.

Timer Cod. P130024Weekly programmer for REEL RADIO or external ER-1 receiver.Weekly programmer for REEL RADIO or external ER-1 receiver.

Pad Rcd 01 R Cod. D1119091-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

Pad Rcd 05 R Cod. D1119105-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

Pad Rcd 01 F Cod. D111911Wall-mounted remote control 1 channel for radio tubes.Wall-mounted remote control 1 channel for radio tubes.

CLIP B 00 R04 Cod. N999522Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack.Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack.

CLIP1 B 00 R03 Cod. N999521Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs.Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs.

MIME PAD Cod. P1210284-channel wall-mounted radio control with rolling code.4-channel wall-mounted radio control with rolling code.

U-PROG Cod. P111529Programmer for radio control units and receivers with possibility of wired or BlueTooth connection.Programmer for radio control units and receivers with possibility of wired or BlueTooth connection.

AXXEDO NOISE FILTER Cod. N999658The Noise Filter kit comprises two filters that protect the AXXEDO line devices from noise generated by inductive loads (e.g. relay coils,...
The Noise Filter kit comprises two filters that protect the AXXEDO line devices from noise generated by inductive loads (e.g. relay coils, electric lock coils, etc.) and transients (voltage peaks).

AXXEDO BOX Cod. D223078Panel box for Axxedo control units.
Control box equipped with DIN rails.Panel box for Axxedo control units.
Control box equipped with DIN rails.

AXXEDO POWER Cod. D121696 Switching power supply 24 V 2 A.Switching power supply 24 V 2 A.

KABP Cod. P125042Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT.Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT.

VIRGO BAT Cod. P125008Set of backup batteries for VIRGO.Set of backup batteries for VIRGO.

BT BAT Cod. P125005Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO.Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO.

CB EOS Cod. P125006Set of backup batteries for VENERE D.Set of backup batteries for VENERE D.

BT BAT1 Cod. P125007Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.

ECOSOL CHARGER Cod. N999477Battery chargers for ECOSOL BOX and ECOSOL DOUBLE.Battery chargers for ECOSOL BOX and ECOSOL DOUBLE.

MCL BT A BAT KIT Cod. P125038Set of backup batteries for MICHELANGELO BT A barriers.Set of backup batteries for MICHELANGELO BT A barriers.

BAT KIT 1 Cod. P120017Set of backup batteries for GIOTTO series barriers. Not compatible with GIOTTO BT A.Set of backup batteries for GIOTTO series barriers. Not compatible with GIOTTO BT A.

BBV SLC TL Cod. P111503Battery powered anti-panic device for VISTA SL C, TL.Battery powered anti-panic device for VISTA SL C, TL.

BBT BAT Cod. P125020Set of backup batteries for THALIA and THALIA P.Set of backup batteries for THALIA and THALIA P.

BBV TWIN Cod. P120068TWIN backup batteries.TWIN backup batteries.

BBV SW MXL Cod. P111564Emergency battery kit for Vista SW MXL, compatible with SXL with external installation.Emergency battery kit for Vista SW MXL, compatible with SXL with external installation.

SL BAT2 Cod. P125035Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

GIOTTO M BG BAT KIT Cod. P120074Buffer battery kit for Giotto BT A series barrier.Buffer battery kit for Giotto BT A series barrier.

BATT-EB Cod. P975005Backup battery kit to allow bollards to stay up in case of no power.Backup battery kit to allow bollards to stay up in case of no power.

BBV BATT MODULO VISTA SL Cod. P111768Set of backup batteries for VISTA SL.Set of backup batteries for VISTA SL.

STR Cod. N190106Pair of infrared STR sensors for ERIS A30.Pair of infrared STR sensors for ERIS A30.

VENTIMIGLIA NS Cod. P111401 00001Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).Infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard).

EBP Cod. P123001 00001230 V electric drop lock.230 V electric drop lock.

EBP 24 Cod. P123001 0001324 V solenoid lock, with 230/24 V transformer installable in control panel.24 V solenoid lock, with 230/24 V transformer installable in control panel.

ECB VERTICALE Cod. D121018Vertical solenoid lock, 12/24 V.Vertical solenoid lock, 12/24 V.

SCC Cod. N733392Release for ELI 250N and SUB BT with lever key.Release for ELI 250N and SUB BT with lever key.

CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.

CLS/82 Cod. D610256Triangular release key for SUB operators l=82 mm.Triangular release key for SUB operators l=82 mm.

ST Cod. P115003Automatic bolt release for sectional doors.Automatic bolt release for sectional doors.

SET/S Cod. N733069External release for insulated sectional and overhead doors of thickness up to 50 mm.External release for insulated sectional and overhead doors of thickness up to 50 mm.

RCA Cod. N733421Lever release for ARGO with steel cable, length 3.5 m.Lever release for ARGO with steel cable, length 3.5 m.

RCAL Cod. N733422Lever release for ARGO with steel cable, length 7 m.Lever release for ARGO with steel cable, length 7 m.

SM1 Cod. P115005External manual release for overhead garage door (1 operator).External manual release for overhead garage door (1 operator).

SM2 Cod. P115001External manual release for overhead garage door (2 operators).External manual release for overhead garage door (2 operators).

SEB Cod. N733020External key release for BERMA, FORB, IGEA LB and IGEA LB BT.External key release for BERMA, FORB, IGEA LB and IGEA LB BT.

SCP Cod. N733502Release for ELI 250 and SUB BT with personalized key.Release for ELI 250 and SUB BT with personalized key.

BOX Cod. N574039Wall safe for unlocking with steel cable and electrical control; cable not included.Wall safe for unlocking with steel cable and electrical control; cable not included.

SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.

RME 1 BT Cod. P11127424 V single channel metal object detector with installation base.24 V single channel metal object detector with installation base.

RME 2 Cod. P111001 00003230 V dual channel metal object detector with installation base.230 V dual channel metal object detector with installation base.

U-BASE ANDROID Cod. P111523Management and programming software for BFT control and receiver units. Version for Android smartphones and tablets, Bluetooth connection.Management and programming software for BFT control and receiver units. Version for Android smartphones and tablets, Bluetooth connection.

AXXEDO SCRATCH CARD 4 Cod. P111674Scratch card containing the secret code enabling management of 4 entry points through axxedo soft.Scratch card containing the secret code enabling management of 4 entry points through axxedo soft.

AXXEDO SCRATCH CARD 16 Cod. P111675Scratch card containing the secret code enabling management of 16 entry points through axxedo soft.Scratch card containing the secret code enabling management of 16 entry points through axxedo soft.

ALLU Cod. P800104Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards).Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards).

ALLU K12 Cod. P975069Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards).Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards).

ALLU 2 MAXIMA ULTRA Cod. P120075Power supply for ATM LIGHT Kit on Maxima Ultra.Power supply for ATM LIGHT Kit on Maxima Ultra.

SCS 1 Cod. P111376Expansion card.Expansion card.

SCS WIE Cod. P111408Board for connection of SELETTO (E) push-button panel and COMPASS SLIM proximity reader Until stocks last.Board for connection of SELETTO (E) push-button panel and COMPASS SLIM proximity reader Until stocks last.

ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.

ME BT Cod. D111761Control board for 24Vac solenoid lock for 24V automation systems.Control board for 24Vac solenoid lock for 24V automation systems.

ECOSOL DOUBLE Cod. D113732Expansion board with batteries Included.Expansion board with batteries Included.

SCHEDA MCL KIT Cod. P120009Control board for KIT MCL LIGHT and KIT MCL LAMPO.Control board for KIT MCL LIGHT and KIT MCL LAMPO.

B EBA BLUE GATEWAY Cod. P111469Expansion board for BLUETOOTH connection management.Expansion board for BLUETOOTH connection management.

B EBA WIE DRIVER Cod. P111467Expansion card for connection of WIEGAND accessories, compatible with U-Link control units.Expansion card for connection of WIEGAND accessories, compatible with U-Link control units.

B EBA RS 485 LINK Cod. P111468Expansion board for connection of central units with serial controls management.Expansion board for connection of central units with serial controls management.

B EBA BLUE ENTRY ANDROID 16 Cod. P111533BLUE-TOOTH expansion card for Blue Entry system. Manages up to 16 smartphones with the Android operating system.BLUE-TOOTH expansion card for Blue Entry system. Manages up to 16 smartphones with the Android operating system.

B EBA BLUE ENTRY ANDROID 4 Cod. P111531BLUE-TOOTH expansion card for Blue Entry system. Manages up to 4 smartphones with the Android operating system.BLUE-TOOTH expansion card for Blue Entry system. Manages up to 4 smartphones with the Android operating system.

B EBA BLUE ENTRY ANDROID 8 Cod. P111532BLUE-TOOTH expansion card for Blue Entry system. Manages up to 8 smartphones with the Android operating system.BLUE-TOOTH expansion card for Blue Entry system. Manages up to 8 smartphones with the Android operating system.

B EBA RS 485 GATEWAY Cod. P111530GATEWAY expansion card for management of RS 485 connection.GATEWAY expansion card for management of RS 485 connection.

B EBA TCP/IP GATEWAY Cod. D113805 00002Gateway expansion card to connect automation systems in TCP/IP networks via U-Link slot. It manages up to 120 U-Link devices connected via B...
Gateway expansion card to connect automation systems in TCP/IP networks via U-Link slot. It manages up to 120 U-Link devices connected via B EBA RS-485 Link.

B EBA BLUE ENTRY IOS LE 16 Cod. P111748BLUE-TOOTH expansion card for Blue Entry system (max 16 Android smartphones).BLUE-TOOTH expansion card for Blue Entry system (max 16 Android smartphones).

B EBA BLUE ENTRY IOS LE 8 Cod. P111748 00001BLUE-TOOTH expansion card for Blue Entry system (max 8 Android smartphones).BLUE-TOOTH expansion card for Blue Entry system (max 8 Android smartphones).

B EBA BLUE ENTRY IOS LE 4 Cod. P111748 00002BLUE-TOOTH expansion card for Blue Entry system (max 4 Android smartphones).BLUE-TOOTH expansion card for Blue Entry system (max 4 Android smartphones).

B EBA WI-FI GATEWAY Cod. P111494Expansion card permitting connection of a U-link device to a home Wi-Fi network. Connected operators may be remotely managed with the...
Expansion card permitting connection of a U-link device to a home Wi-Fi network. Connected operators may be remotely managed with the U-control app available for Android and IOS smartphones.

AMV Cod. N998600Virgo Smart BT A 20 mechanical stop KIT.Virgo Smart BT A 20 mechanical stop KIT.

TFS Cod. P111775Virgo Smart BT A 3-wire board KIT (1 Kit per engine).Virgo Smart BT A 3-wire board KIT (1 Kit per engine).

LAS Cod. N728052VIRGO BT A slide lever.VIRGO BT A slide lever.

AAP Cod. N999735VIRGO SMART BT A misaligned doors accessory.VIRGO SMART BT A misaligned doors accessory.

CKK Cod. N999592Pack of mounting tabs for ARGO and ARGO G.Pack of mounting tabs for ARGO and ARGO G.

CA2C Cod. N733041Accessories for the installation of two BERMA series operators on overhead door (curved arms).Accessories for the installation of two BERMA series operators on overhead door (curved arms).

PRV TL T Cod. P111660Vista tl anodised closing profile, length 6.8 m.Vista tl anodised closing profile, length 6.8 m.

SPRV TL T Cod. P111661Profile closing brackets, 5pcs.Profile closing brackets, 5pcs.

KIT ML MCL40 Cod. P120072Spring kit for conversion from Michelangelo 60 to Michelangelo 40.Spring kit for conversion from Michelangelo 60 to Michelangelo 40.

PRV AA TL Cod. P111717Wing attachment profile for Vista TL, 5100 mm long.Wing attachment profile for Vista TL, 5100 mm long.

PRV AA SL Cod. P111681Leaf attachment profile for Vista SL. L = 2600 mm.Leaf attachment profile for Vista SL. L = 2600 mm.

CHN-DRIVE 1 Cod. P800088Above-ground guide for holding chain (2 m).Above-ground guide for holding chain (2 m).

FCS MAXIMA 5 Cod. P1200332 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35.2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35.

CA1 Cod. N733038Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width.Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width.

CA2 Cod. N733040Straight arm accessories for installation of two BERMA series operators on overhead door.Straight arm accessories for installation of two BERMA series operators on overhead door.

THEKE B PRA 01 Cod. P125018Metal protection box for ARES and ICARO series sliding operators.Metal protection box for ARES and ICARO series sliding operators.

PRV BR.48 Cod. P111618 00001Finishing brush 20 mm, length 2.5 m.Finishing brush 20 mm, length 2.5 m.

PRV BR.49 Cod. P111618 00002Finishing brush 27 mm, length 2.5 m.Finishing brush 27 mm, length 2.5 m.

TSWP XL Cod. P111568Profiles Vista SW double, 1.5 m.Profiles Vista SW double, 1.5 m.

FAF 2R Cod. P125025

WMP SL SLC Cod. P111680Contains 2 crossbeam support profiles of length L = 1 m each.Contains 2 crossbeam support profiles of length L = 1 m each.

FCS MAXIMA 6-8 Cod. P1200342 additional limit switches for MAXIMA 60/80.2 additional limit switches for MAXIMA 60/80.

SRV DIN Cod. P120032Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block.

FCS MU68 Cod. P1200352 additional limit switches for Maxima Ultra 6 - 8 m.2 additional limit switches for Maxima Ultra 6 - 8 m.

ACV30 Cod. P111538Vandal-proof protection for AKTA photocells.Vandal-proof protection for AKTA photocells.

ACV20 Cod. P903024Vandal-proof protection for DESME photocells.Vandal-proof protection for DESME photocells.

PHP BI Cod. P903022Dual-face adapter for THEA/DESME photocells.Dual-face adapter for THEA/DESME photocells.

PHP ADA CC Cod. P903021Pair of adapters for the installation of THEA/DESME photocells on CC posts.Pair of adapters for the installation of THEA/DESME photocells on CC posts.

PHP2 Cod. P903019Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm.Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm.

APL Cod. P903020Pair of foundation plates for PHP posts.Pair of foundation plates for PHP posts.

PHP ADA Cod. P903025Pair of adapters for the installation of AKTA photocells on PHP posts.Pair of adapters for the installation of AKTA photocells on PHP posts.

PHP BA1 Cod. P903023Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures.Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures.

PHP Cod. P903018Pair of aluminium posts for THEA/DESME series photocells Height 522 mm.Pair of aluminium posts for THEA/DESME series photocells Height 522 mm.

PHP3 Cod. P903026Pair of aluminium columns for Q.bo series selectors. Height 1038 mm.Pair of aluminium columns for Q.bo series selectors. Height 1038 mm.

DCW BAT Cod. N999465Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30.Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30.

KIT FPA1 Cod. P111683FPA kit with pair of photocells and brackets for Vista.FPA kit with pair of photocells and brackets for Vista.

KIT FPA2 Cod. P111685FPA kit with two pairs photocells and brackets for Vista.FPA kit with two pairs photocells and brackets for Vista.

KIT FPA MA-I2 Cod. P111687FPA MA 12 kit with two pairs photocells and brackets for Vista.FPA MA 12 kit with two pairs photocells and brackets for Vista.

COMPASS - CUSTOM ISOCARD Cod. D110912ISO standard proximity badge.ISO standard proximity badge.

COMPASS - RING Cod. D110914Key-ring transponder for access control.Key-ring transponder for access control.

PUSH PLATE Cod. P111677Activation button.Activation button.

MAGIC SWITCH Cod. P111676Activation touch button.Activation touch button.

TLIGHTS Cod. P800117Traffic lights and top covering for totem.Traffic lights and top covering for totem.

KIT LIGHT1 Cod. P120001 00002Lights for booms over 4.5 m.Lights for booms over 4.5 m.

KIT LIGHT Cod. P120001 00001Lights on boom 3 - 4.5 m.Lights on boom 3 - 4.5 m.

MCL LAMPO KIT Cod. P120006Integrated flashing light. The MCL CARD KIT is needed for operation.Integrated flashing light. The MCL CARD KIT is needed for operation.

MCL LIGHT KIT Cod. P120005 00001Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation.Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation.

ACOUSTIC DETECTOR Cod. D113705Adjustable acoustic detector for sirens.Adjustable acoustic detector for sirens.

CMS Cod. D831081Sign.Sign.

B 00 R01 Cod. P123026Metal guard for B LTA.Metal guard for B LTA.

B 00 R02 Cod. P123025Wall mounting for B LTA series flashing beacons.Wall mounting for B LTA series flashing beacons.

STOPPY ALARM Cod. P800075Anti-theft kit: to be ordered separately, assembled during production.Anti-theft kit: to be ordered separately, assembled during production.

TRAFFIC LIGHT Cod. D121458Traffic lights with two red/green lights.Traffic lights with two red/green lights.

ANEM Cod. P111182Anemometric ​​sensor with encoder for wind.Anemometric ​​sensor with encoder for wind.

CREP Cod. P111183Twilight sensor.Twilight sensor.

CLONIX 2 Cod. D111662Dual channel 433 MHz rolling code plug-in receiver. 128-position memory. 12-28 Vdc , 16-28 Vac.Dual channel 433 MHz rolling code plug-in receiver. 128-position memory. 12-28 Vdc , 16-28 Vac.

RTD CA 2048 Cod. D113671 00002Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS.Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS.

CLONIX 2 2048 Cod. D111664Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory.Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory.

CLONIX 2E Cod. D113674 00001External dual channel 433 MHz rolling code receiver. 128-position memory. 24 V.External dual channel 433 MHz rolling code receiver. 128-position memory. 24 V.

CLONIX 4 RTE Cod. D113718 00002External 4-channel 433 MHz rolling code receiver. Power relay outputs (16 A 230 V). 230 V.External 4-channel 433 MHz rolling code receiver. Power relay outputs (16 A 230 V). 230 V.

ER 1 Cod. P130025External receiver for REEL RUA series operators. Compatible with PAD series transmitters.External receiver for REEL RUA series operators. Compatible with PAD series transmitters.

AEL 30.8 Cod. D113631Antenna for 30.875 MHz radio remote control with 4 m cable.Antenna for 30.875 MHz radio remote control with 4 m cable.