SUB G DX

Product code P930010 00005 International code 2601300
Underground hydraulic openers for swing gates

In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1,8 m. Manoeuvre time 33 s. Right operator.

Underground hydraulic openers for swing gates

Main features

The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Control unit with programming display and new, simplified scenario-based programming

Technologies

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Technical data sheets

technical design
Max. width of door/gate wing 1.8 m
Frequency of use very intensive
Max. weight of door/gate wing 800 kg
Protection rating IP67
Maximum angle 180 °
Environmental conditions -10 ÷ 60 °C
Cycle time 33 s
Interconnectivity no
Type of limit switch work time
Control unit RIGEL 6
Slowdown no
Board power supply 230 V
Locking Open/close hydraulics
Motor voltage 230 V
Release Triangle key
Power consumption 250 W
Impact reaction Hydraulic clutch

Commercial documents

Swinging gates
Hydraulic automation systems for swinging gates
Show

Video

Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

Recommend accessories

CLS/82
D610256

Triangular release key for SUB operators l=82 mm

FCS DX
N733066 00003

Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

FCS SX
N733066 00004

Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS G
N733092

Weight-bearing foundation box for preparation for assembly of SUB G right and left operator

BSC
N728002

Arm for installation of SUB out of the gate axis

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

An unexpected error occurred: please reload the page or try again later.