KLEIO

433 MHz rolling code remote control with soft touch finishes

catalog (PDF)

433 MHz rolling code remote control with soft touch finishes

Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels. Softtouch finishes.

433 MHz rolling code remote control with soft touch finishes

Technologies

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

    Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

      Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

      Accessories

      CLONIX 2E AC U-LINK 230
      D113807 00002

      433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote controls

      433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote...

      CLONIX UNI AC U-LINK 230V
      D113808 00003

      433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol (features 3 connection ports). Power supply, 230 V, can store up to 2,048 remote controls

      433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol...

      CLONIX 2E
      D113674 00001

      External two-channel 433 MHz rolling code receiver. 128 position memory. 24 Vpower supply.

      CLONIX 4 RTE
      D113718 00002

      External 4-channel 433 MHz rolling code receiver. 230 V power supply.

      U-BASE
      P111510

      Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

      U-PROG
      P111529

      Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

      CLIP B 00 R04
      N999522

      Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

      CLIP1 B 00 R03
      N999521

      Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs